NSK UCFCX09-113D1 flange bearing 4 holes

NSK UCFCX09-113D1 belongs to flange bearing 4 holes, part of our Bearing housings range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for UCFCX09-113D1 and any equivalents.

A UCFCX unit pairs an insert bearing with a cast iron flange housing, giving you a four-bolt mounted assembly for supporting rotating shafts in power transmission equipment. The design keeps mounting straightforward and holds the shaft firmly in place.

Reading the code helps you order the right part. The U stands for a mounted unit, CFC identifies the four-bolt flange housing with insert bearing, and X denotes the housing type. What follows tells you the shaft size and insert variant. In UCFCX05-013D1 and UCFCX05-014D1, size 05 is shared but the insert bore diameter differs. UCFCX05D1 is the version with no extra numeric suffix. The D1 suffix marks a particular execution of the insert in the series.

You will find these units on conveyors, belts, elevators, mixers, fans and process lines in food, chemical, cement and aggregate plants. They suit machines with horizontal or vertical shafts that need solid support. The four-bolt flange mounts on sheet metal or a steel structure, and alignment and removal are simple without taking the whole shaft apart.

When selecting a unit, check shaft diameter, load type (radial, axial or combined) and the environment. The insert seal determines protection against dust, water or chemical agents, so pick an execution with suitable seals for damp areas or particle exposure. Insert bearing lubrication is permanent in many versions, yet it pays to inspect seals and operating temperature. During mounting, confirm the flange is aligned and tighten the bolts evenly to prevent deformation.

UCFCX mounted units from different brands share standardized flange dimensions and shaft diameters, which simplifies interchangeability. For a replacement, the housing code and shaft size are the key data for locating an equivalent. MR supplies the NSK line and can point you to the variant that fits your equipment without compromising the assembly's performance.

If you have the code of the unit in service or need a specific size, send it over WhatsApp and we will quote it. We can also advise when the housing works under particular load, speed or environmental conditions.