NSK L 623149 tapered roller bearing cone
- Brand
- NSK
- Category
- Bearings
- Subcategory
- Tapered roller bearings
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Other brands for this category
Ask us for alternatives. We check every equivalent against the part number and your application.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
NSK L 623149 belongs to tapered roller bearing cone, part of our Bearings range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for L 623149 and any equivalents.
The cone is the inner assembly of a tapered roller bearing, consisting of the inner raceway, the rollers and the cage. It fits on the shaft and pairs with the cup, which is mounted in the housing. NSK's L series covers light-section cones intended for applications with limited radial space and moderate combined loads.
The L series is identified by the letter L followed by a number, as in L 44640, L 44643, L 44649 and L 623149. The L denotes the light-section series, while the number defines the size and geometry of each cone. Every cone has a matching cup, often with a different number. To order the correct replacement, provide the complete code stamped on both the cone and the cup.
Typical uses include wheel hubs on cars and light commercial vehicles, agricultural machine shafts, gearboxes and power transmission equipment. L series cones also appear in pumps, fans and conveyors, where alignment and axial adjustment affect the service life of the assembly. They are chosen when radial and axial forces must be supported simultaneously in a compact envelope.
When selecting an L series cone, consider the radial and axial load, the rotation speed and the lubrication method. The cone is press-fitted on the shaft, and the cup is mounted in the housing. Axial clearance must be controlled: too tight causes overheating, too loose leads to vibration and premature wear. Use grease or oil suited to the operating temperature, and ensure careful alignment between shaft and housing.
During replacement, equivalent sizes from other manufacturers may be available under different codes. If you have a code from another brand or an unidentified part, we can indicate a compatible alternative. We work with the exact designation shown on the part. Interchangeability exists, but verifying dimensions and tolerances before mounting is always recommended.
For an NSK L series tapered roller bearing cone, send the complete code via WhatsApp or email. We will handle your quote promptly and can also advise on mounting and lubrication. If you only have measurements, share them and we will reply with a suitable solution.
Dimensions
Dimensions and tolerances: Message us the part number on WhatsApp and we'll verify its dimensions and version with the manufacturer's datasheet.
Frequently asked questions
- What is the difference between the cone and the cup?
- The cone is the inner raceway with rollers and cage, mounted on the shaft. The cup is the outer raceway, seated in the housing. They are matched and are generally replaced as a set.
- How do I order if I don't have the code?
- Send a photo of the part or the main dimensions: inner diameter, outer diameter and width. With that information we can identify the equivalent code and provide a quote.
- What lubrication is suitable for an L series cone?
- It depends on speed and temperature. Lithium grease or oil of appropriate viscosity is common. Keep lubrication clean and control axial clearance to avoid overheating and premature wear.