NSK AHX 3228 withdrawal sleeve
- Brand
- NSK
- Category
- Bushings and sleeves
- Subcategory
- Withdrawal sleeve
- Series
- AHX
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Other brands for this category
Ask us for alternatives. We check every equivalent against the part number and your application.
NSK and FAG: matching part numbers →NSK and BGL: matching part numbers →
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
NSK AHX 3228 belongs to withdrawal sleeve, part of our Bushings and sleeves range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for AHX 3228 and any equivalents.
A withdrawal sleeve from the NSK AHX series sits between a cylindrical shaft and a bearing with a tapered bore, holding the bearing in place and letting it come off again without harm to the raceways or the seat. MR Industrial Accessories LLC supplies this series to maintenance and purchasing teams throughout the United States and Latin America.
Reading the code is straightforward once you know the pattern. The AHX prefix comes first, then a number that grows with size, as in AHX 310, AHX 311 and AHX 312. A four-digit reference such as AHX 2310 points to a variant that is longer or larger in diameter. Match the reference to the bearing and to the shaft it will sit on.
These sleeves show up in power transmission equipment, pumps, fans, conveyor belts and agricultural machinery. Their value on the floor is simple: a tapered bearing goes onto a plain shaft with no taper machining, so maintenance gets easier and downtime shrinks. Food plants, cement plants, steel mills and repair shops all rely on them.
Selection comes down to shaft diameter, bearing type and how the bearing locks in place. Surfaces must be clean, lubrication adequate, and tightening done with a lock nut. Shaft and housing need to line up, or parasitic loads appear. When the bearing bore is tapered, the sleeve has to match both taper and thread pitch.
Crossing brands is a matter of code and dimensions. Give us another manufacturer's number and we can identify the equivalent NSK reference. Taper and diameter decide whether the swap works, since sleeves from different series are not always interchangeable. Your bearing code or shaft measurements are enough for us to check.
For a quote on NSK AHX series withdrawal sleeves, send the exact code by WhatsApp or email. The team answers promptly, suggests equivalents and helps you choose if the designation or the application is unclear.
Dimensions
- Bore
- 140 mm
Frequently asked questions
- What separates a withdrawal sleeve from an adapter sleeve?
- A withdrawal sleeve both secures the bearing and simplifies later removal without damaging it, while an adapter sleeve serves installation only. The AHX series is the withdrawal type, so the bearing can be reused at the next maintenance stop.
- How do I find the right AHX sleeve for my bearing?
- The bearing code and the shaft diameter are the two inputs we need to name the correct AHX reference. If the bearing is in front of you, the tapered bore and thread measurements also work.
- Can NSK AHX sleeves be used with bearings from other makers?
- They can, provided taper, diameter and thread pitch line up. Equivalences are set by dimensions, so send your bearing code and we will confirm which NSK reference replaces it.