NSK 6217 deep groove ball bearing
- Brand
- NSK
- Category
- Bearings
- Subcategory
- Deep groove ball bearings
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Other brands for this category
Ask us for alternatives. We check every equivalent against the part number and your application.
SKF and NSK: matching part numbers →NSK and FAG: matching part numbers →NSK and TIMKEN: matching part numbers →NSK and RKB: matching part numbers →
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Decoding NSK 6217
- 62Series
- Deep groove ball bearings, 62 series. Series differ in outside diameter and width even when the bore is the same.
- 17Bore
- Bore 85 mm (17 × 5).
6217 is the standard ISO basic designation, which sets the bearing type, series and bore.
Description
NSK 6217 measures 85 mm across the bore and 150 mm across the outside diameter; its width is 28 mm (85 x 150 x 28 mm).
NSK 6217 belongs to deep groove ball bearing, part of our Bearings range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for 6217 and any equivalents.
NSK deep groove ball bearings in this group carry a basic designation made up of digits only, for instance 602, 6204, 6908 or 60/630. The range spans many series and sizes, from miniature bearings up to large-diameter units. The shared element is the design itself; each part number brings its own dimensions, so the complete number has to be quoted.
Inside a deep groove ball bearing, a single row of balls runs in deep raceways formed in the inner and outer rings. That arrangement lets the bearing take radial load and, at the same time, moderate axial load in either direction, while running with little friction. General-purpose rotating equipment relies on this design more than any other: electric motors, fans, pumps and conveyors are typical examples.
The digits in the designation point to series and size, and part numbers that look alike can differ widely in diameter or width. Take 6204 and 6214: the first two digits match, the dimensions do not. Slash designations such as 69/600 or 60/630, and five-digit ones such as 16001, also belong to this group and are ordered by their complete number.
For a replacement, read the part number marked on the ring. When it cannot be read, measure three values: bore, outside diameter and width. Those measurements, checked against the part number, tell you whether it is the same bearing. Bearings of this type are supplied under their basic designation, without suffixes.
At mounting, press on the ring that carries the tight fit, keep the force away from the balls, and use tooling that seats the bearing evenly instead of striking it. Inspect the shaft and housing seats, then lubricate to suit the speed, temperature and load of the application, as the manufacturer advises.
To obtain a quote, send the full part number and the quantity by WhatsApp or email. A photo of the bearing being replaced, or its dimensions, also helps. Our team answers promptly and can suggest equivalent options or assist with the selection.
Dimensions
85 x 150 x 28 mm (d x D x B): boundary dimensions for basic designation 6217, according to ISO 15.
- Bore
- 85mm
- Outside diameter (D)
- 150mm
- Width (B)
- 28mm
SKF and other brands, same size
Other brands' pages with basic designation 6217: 85 x 150 x 28 mm (d x D x B) per ISO 15.
- Need the SKF 6217? We can also quote:62176217/C36217/C412 more →
- FAG62176217-2Z6217-2RSR
- RKB6217
- TIMKEN62176217MB
What they share are the ISO 15 boundary dimensions, not the specs: seals or shields, internal clearance, cage and load rating may vary with brand and suffix. Every quote is by full part number.
Frequently asked questions
- NSK 6217 bearing: what are its dimensions?
- NSK 6217 measures 85 mm across the bore and 150 mm across the outside diameter; its width is 28 mm (85 x 150 x 28 mm). Those are the boundary dimensions standardized in ISO 15 for basic designation 6217.
- Can two similar part numbers be used in place of each other?
- Not automatically. Dimensions may differ even when the numbers look close, so confirm the complete part number or the bore, outside diameter and width before fitting a replacement.
- Which loads can a deep groove ball bearing carry?
- It handles radial load plus moderate axial load in both directions and runs with low friction, which suits general-purpose rotating machinery.
- What should I do when the part number is worn off?
- Measure the bore, the outside diameter and the width, then send those figures with a photo through WhatsApp or email so we can identify the bearing.