Industrial pulley 350 mm, 8 grooves, section C
- Brand
- EMMAR
- Category
- Power transmission
- Subcategory
- Pulleys
- Section
- C
- Series
- Sección C
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
EMMAR POLEA 350 8C belongs to pulleys, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for POLEA 350 8C and any equivalents.
The 350 8C is a V-belt pulley from EMMAR, built in-house. Its 350 mm diameter, eight grooves and section C profile suit drives that carry medium to heavy loads. You will find it on compressors, mills, conveyors, fans and similar machinery. Because MR manufactures it, machining and finishing options can be reviewed against your equipment.
Reading the code is straightforward. The 350 stands for the outside diameter in millimeters, the 8 tells you how many belt grooves the pulley carries, and the C is the V-belt profile. Section C belts are wider than A or B, so each groove carries more power, and running eight in parallel spreads the load across the drive. That diameter also sets the ratio once the pulley is paired with its opposite number on the drive.
The part is produced in cast iron or machined steel depending on the duty, and it mounts on cylindrical or tapered shafts. Bore size, keyway and bushing style are the details to confirm before ordering, so keep the manufacturer's data sheet on hand. Section C belts must match the groove profile, and correct tension keeps slipping and groove wear in check.
Typical installations include screw compressors, mills, mixers, conveyor drives, industrial fans and high-flow pumps, as well as agricultural machinery and continuous-process lines. In every case the groove count and diameter follow from the power to be transmitted and the shaft speed. Where the drive reverses or the load pulses, balancing is worth raising with us.
During mounting, check that the pulley sits square on the shaft and that the grooves are clean and free of burrs. Belt alignment with the mating pulley and even spacing between grooves matter as much as tension. If you are replacing a part, send the complete part number, the groove count and the diameter you are running today, plus the shaft diameter and fixing type. We can check our manufacturing line for a match or machine one to size, and the original brand does not have to be ours.
For a quote on the 350 8C pulley or any other size, send the part number by WhatsApp or email. A photo of the old pulley or of the equipment helps us confirm the section and groove count and advise you on the fit.
Dimensions
- Size
- 350mm
- Grooves
- 8
- Section
- C
Frequently asked questions
- What does the C in the part number mean?
- It is the V-belt profile. Section C is wider than A or B and carries more power per belt. With eight grooves, this pulley takes up to eight section C belts.
- Can this pulley replace one from another brand?
- If diameter, groove count, section and shaft fixing all line up, yes. Send the details of the pulley you are running and we will confirm whether this EMMAR part fits or point you to a different size.
- How do I ask for a different groove count?
- Message us with the diameter, section and number of grooves you need. Since EMMAR produces these pulleys in-house, groove count and bore machining can be reviewed as variants.