Industrial pulley 600 mm, 6 grooves, section C
- Brand
- EMMAR
- Category
- Power transmission
- Subcategory
- Pulleys
- Section
- C
- Series
- Sección C
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
EMMAR POLEA 600 6C belongs to pulleys, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for POLEA 600 6C and any equivalents.
The EMMAR 600 6C is a V-belt pulley with a 600 mm diameter, six grooves and section C. It transfers power from a motor to driven equipment while holding the required speed ratio and torque. Because MR produces this pulley in its own shop, the machining and balancing steps stay under direct control, which helps the pulley run smoothly and keeps belt wear in check.
The part number POLEA 600 6C packs three pieces of information: the 600 mm diameter, the six grooves and the C belt section. Section C belts are wide-profile V-belts used in medium and high power drives. With six grooves, you can run up to six belts side by side on the same hub, raising the transmission capacity without going to a larger diameter.
This size and groove count fits equipment such as grinding machines, mixers, screw compressors, high-flow industrial fans, process centrifugal pumps and machine tool drives. It also appears on production lines where motor speed must be reduced and held steady under changing load. In every case, confirm that the shaft and keyway match the pulley hub before installation.
Selection depends on the power to be transmitted, the RPM of both the motor and driven shafts, and the belt type. Groove count tells you how many belts can be mounted, but real capacity comes from the diameter and section together. When installing, align the pulleys with a straightedge or laser, set belt tension per the belt maker's manual and check that the shafts are parallel. Even a small misalignment cuts belt life and loads the equipment bearings.
Need a different diameter, groove count or section? MR can manufacture pulleys to order. Send the part number POLEA 600 6C through WhatsApp together with a sketch or the shaft details: diameter, keyway length and fixing type. The technical team reviews the best option within the in-house manufacturing line and replies with a quote.
MR makes pulleys, split plummer block housings and ANSI chains at its facility, and supplies bearings, seals, bushings and lubricants from leading brands. Message us on WhatsApp with the part number and we will quote it.
Dimensions
- Size
- 600mm
- Grooves
- 6
- Section
- C
Frequently asked questions
- What does 6C mean in the designation?
- The 6 stands for the number of grooves and the C for the V-belt section. So it is a pulley for six section C belts with a 600 mm diameter. Other combinations can be manufactured to order.
- How do I request a pulley with a different size or number of grooves?
- Send the current part number via WhatsApp along with the shaft data: diameter, keyway and fixing type. With that information, production of a pulley in the size or groove count you need can be evaluated.
- What should I check before mounting it?
- Make sure the shaft and keyway fit the hub, align the pulleys with a straightedge or laser, and tension the belts according to the belt manufacturer's manual. Proper alignment prevents vibration and extends belt life.