Industrial pulley 270 mm, 6 grooves, section C
- Brand
- EMMAR
- Category
- Power transmission
- Subcategory
- Pulleys
- Section
- C
- Series
- Sección C
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
EMMAR POLEA 270 6C belongs to pulleys, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for POLEA 270 6C and any equivalents.
The EMMAR 270 6C is a V-belt pulley built for drives that call for multiple belts working side by side. It measures 270 mm in diameter and carries six grooves in section C. This configuration suits industrial machines, fans, compressors and other transmission systems where a sturdy, well-balanced pulley is required. Because MR manufactures this line in-house, machining details can be adapted to the equipment.
The designation breaks down simply: 270 mm is the diameter, 6 is the number of grooves, and C is the belt section. Section C covers wide-profile V-belts, which handle higher torque than narrower profiles. Running six belts in parallel spreads the load across the drive, so the system does not depend on a single belt. The 270 mm diameter, paired with the driven pulley, sets the speed ratio. The part is cast or machined from steel depending on the production route, and it is supplied with the bore and keyway to specification.
You will find this pulley in industrial fans, screw compressors, centrifugal pumps, conveyor drives and machine tools. Process equipment that must hold a set speed with several belts also uses it. In food, chemical and air treatment plants, it appears in ventilation units and in low to medium power transmissions. With six grooves, it is a common choice when relying on one belt is not acceptable.
Selection comes down to pitch diameter, groove count and belt section. Check that the equipment shaft diameter and keyway match the pulley bore. If the speed is high, balance matters. At assembly, align the pulleys with a straightedge or laser and tension the belts following the belt maker's manual. Inspect the grooves for wear, since a worn groove shortens belt life.
For an equivalent, send the code PULLEY 270 6C or the diameter and groove count you need. Other dimensions, groove counts or belt types can be manufactured or sourced. Special machining such as tapered bores or bushings is also evaluated. A sketch or the shaft and belt data helps us quote accurately.
To request a quote or ask about a variant, message us on WhatsApp and mention PULLEY 270 6C. Our team replies promptly with the information you need to move forward.
Dimensions
- Size
- 270mm
- Grooves
- 6
- Section
- C
Frequently asked questions
- What does section C mean?
- Section C is a V-belt profile wider than section B, used for transmitting more power. This pulley has six grooves for section C belts, which distributes the load across several belts.
- Can I order a pulley with another diameter or number of grooves?
- Yes. Since we manufacture in-house, we can machine pulleys with different sizes, groove counts or sections. Send us the equipment data and the belt you plan to use so we can propose an alternative.
- How do I know if the bore is compatible with my shaft?
- You need the shaft diameter and keyway. The pulley is machined to match that data. If you do not have them, measure the shaft with a caliper and send us the value to confirm compatibility.