Industrial pulley 800 mm, 5 grooves, section C

EMMAR POLEA 800 5C belongs to pulleys, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for POLEA 800 5C and any equivalents.

The EMMAR 800 5C is a section C V-belt pulley built with an 800 mm diameter and five grooves. It suits drives that turn slowly but carry heavy torque, such as mills, conveyors and process pumps. Because MR produces this pulley in its own shop, machining and balancing options can be reviewed against the needs of each drive.

Reading the code is straightforward: 800 is the diameter in millimeters, 5 is the groove count and C is the belt profile the pulley takes. Section C covers wide-profile V-belts, which handle substantial power at moderate drive ratios. Spreading the load over five grooves keeps the strain on each individual belt lower and helps the drive run without interruption.

Typical installations include mills, mixers, conveyors, process centrifugal pumps, industrial fans and quarry equipment, plus woodworking machines and production lines that must hold speed within a set tolerance. In each case the large diameter brings motor speed down while still delivering the torque the driven shaft requires.

Before ordering, confirm the shaft diameter and how the pulley fixes to it, whether by keyway, taper bushing or mandrel. Check the center distance and the belt length you have available, and verify alignment between the two pulleys, since parallel or angular misalignment speeds up wear on both the belts and the grooves. At this diameter, balancing also matters: if the pulley will run faster than the usual speed of the equipment, it is worth having it evaluated.

If another size or an equivalent is needed, send the part number POLEA 800 5C or the equipment details, including shaft diameter, groove count, belt section and center distance. With that information we can point you to another diameter in the same series or review a custom build. Bore machining and the fixing method can also be checked against the shaft already in place.

To request a quote or ask about a variant, contact MR Industrial Accessories by WhatsApp or email with the part number POLEA 800 5C. The technical team reviews the application and responds with the option that fits the drive. If the section or groove count is uncertain, a photo of the current pulley together with the shaft measurements is enough to get started.