Industrial pulley 400 mm, 5 grooves, section C
- Brand
- EMMAR
- Category
- Power transmission
- Subcategory
- Pulleys
- Section
- C
- Series
- Sección C
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
EMMAR POLEA 400 5C belongs to pulleys, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for POLEA 400 5C and any equivalents.
When you need to transmit power from a motor to a driven shaft, the EMMAR 400 5C pulley gives you a 400 mm diameter, 5 grooves, and section C profile. This V-belt pulley is manufactured in-house and suits plant equipment that runs continuously. The part number POLEA 400 5C tells you the three key dimensions: outside diameter, number of grooves, and belt cross-section.
Section C is a wide-profile V-belt, so this pulley is built for drives that carry a significant load. The five grooves are machined so each belt sits evenly and grips without slipping. With multiple belts, the load is shared, which can extend belt life and lets you keep running if one belt fails until you replace it.
You will find this pulley on mills, mixers, compressors, pumps, fans, and conveyors, as well as on woodworking machines, crushers, and other equipment that starts under load. It works in any drive where a motor turns a working shaft and you need to adjust speed or distribute power across several shafts with a single belt.
To select the right pulley, note the shaft diameter, keyway type, and the diameter of the motor pulley. The ratio between the two diameters sets the driven shaft speed. Make sure the belt section matches C and that both pulleys have the same number of grooves. During installation, align the pulleys with a straightedge or laser and tension the belts as the equipment manual specifies.
If you need a different diameter or groove count, send the part number and equipment details. Section C pulleys are available with 3, 4, or 6 grooves, and you can change the diameter to adjust speed. We can also help you find an equivalent. The more information you provide, the faster we can quote.
To request a quote for the POLEA 400 5C or any power transmission part, message us on WhatsApp with the part number and quantity. MR Industrial Accessories manufactures split plummer block housings, ANSI roller chains, and pulleys, and distributes bearings, seals, bushings, and lubricants. Our technical team will confirm the size before you buy.
Dimensions
- Size
- 400mm
- Grooves
- 5
- Section
- C
Frequently asked questions
- What does 5C mean in POLEA 400 5C?
- The 5 is the number of grooves, C is the V-belt section for each groove, and 400 is the diameter in millimeters. These three values define the pulley and the belt it takes.
- Can I order a 400 mm pulley with a different number of grooves?
- Yes. Our in-house EMMAR line lets you request section C pulleys with different groove counts and diameters. Send the shaft size, belt section, and number of grooves you need by WhatsApp.
- How do I know if this pulley replaces the one on my machine?
- Check the diameter, number of grooves, and belt section. Also confirm the shaft diameter and keyway. If those match, the pulley is compatible. If unsure, send a photo and measurements by WhatsApp.