Industrial pulley 200 mm, 5 grooves, section C
- Brand
- EMMAR
- Category
- Power transmission
- Subcategory
- Pulleys
- Section
- C
- Series
- Sección C
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
EMMAR POLEA 200 5C belongs to pulleys, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for POLEA 200 5C and any equivalents.
For drives that rely on multiple C-section belts, the EMMAR 200 5C pulley delivers a 200 mm diameter with five grooves. It is produced in-house, so the bore and keyway can be machined to match your shaft. This pulley is built for equipment that runs continuously and demands a balanced, true-running component.
The part number POLEA 200 5C tells you the three key specifications: 200 mm outside diameter, five grooves, and section C belts. Each groove is cut so the belt sits squarely and wears evenly, avoiding the side loading that shortens belt life. Because MR manufactures this pulley, you can specify the bore and keyway to suit the shaft it will be mounted on.
Typical applications include compressors, centrifugal pumps, plant fans, mills, mixers, and conveyor lines—anywhere a single shaft must be driven by several belts in parallel. You will also find it on factory equipment and on agricultural or road machinery that sees heavy loads and frequent starts. With five grooves, the load is distributed across five belts, reducing the tension on each and extending the life of the entire drive.
When selecting this pulley, confirm the shaft diameter, keyway dimensions, and center distance of your equipment. Make sure the belt section is C and that the groove count matches the mating pulley. During installation, align the pulleys with a straightedge or laser, tension the belts per the manufacturer’s manual, and verify that the grooves are parallel. A misaligned pulley can wear out belts and bearings in a matter of weeks.
If you need a different diameter or groove count, send us the part number POLEA 200 5C along with your shaft data. We will locate or manufacture an equivalent pulley. We can also quote the drive and driven pulleys as a pair to keep the transmission ratio balanced. If you have the old pulley, just provide the diameter, grooves, and section, and we will cross-reference it with the designation.
MR Industrial Accessories manufactures this pulley at our facility and supplies it alongside belts, housings, and bearings for power transmission. To confirm the size or request a variant, message us on WhatsApp with POLEA 200 5C and we will respond with a quote.
Dimensions
- Size
- 200mm
- Grooves
- 5
- Section
- C
Frequently asked questions
- What does 5C mean in the designation POLEA 200 5C?
- The 5 stands for the number of grooves, and the C indicates the V-belt section. The 200 is the diameter in millimeters. These three details identify the pulley and allow cross-referencing with the one your equipment requires.
- Can it be ordered with a different shaft diameter or keyway?
- Yes. Since it is in-house manufactured under the EMMAR brand, the bore and keyway are machined to fit the shaft it will be mounted on. Send the shaft diameter and keyway width by WhatsApp to quote the pulley with that size.
- How do I request an equivalent pulley?
- Send the part number POLEA 200 5C, the number of grooves, the section, and the diameter you need. If you have the original pulley, add a photo or the shaft measurements. With that we look for or manufacture the variant and send you the quote.