Industrial pulley 360 mm, 3 grooves, section C
- Brand
- EMMAR
- Category
- Power transmission
- Subcategory
- Pulleys
- Section
- C
- Series
- Sección C
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
EMMAR POLEA 360 3C belongs to pulleys, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for POLEA 360 3C and any equivalents.
When you need to change speed between two shafts on a belt drive, the pulley is the part that sets the ratio. This EMMAR unit measures 360 mm across, carries three grooves, and takes section C belts. The grooves are machined so the belt sits evenly, which helps the drive run without vibration and wear the belt at a consistent rate. It is built for industrial equipment where mounting needs to be straightforward and the drive has to stay reliable.
Read the code POLEA 360 3C as a quick summary of what you are ordering: the diameter in millimeters, the number of grooves, and the belt cross-section. Section C is a medium-to-large V-belt profile, so this pulley fits drives that transmit moderate to high power. Three grooves let you run up to three belts side by side, which raises the torque the drive can carry and gives you some backup if one belt gives out.
You will see this size on compressors, fans, pumps, mills, mixers, and conveying equipment, as well as on production lines where a driven shaft has to turn at a different speed than the motor. Because of the diameter and the number of grooves, it is common in setups that call for a specific ratio and solid belt grip. In a power transmission line it usually works alongside section C belts and parts such as bearings and housings.
Before you order, confirm the pitch diameter, the groove count, and the belt section. Check that the shaft diameter and keyway match the pulley bore. Alignment between the two pulleys matters, since misalignment shows up as uneven belt wear and vibration. Set tension to the belt maker's recommendation; too much tension loads the bearings, and too little lets the belt slip.
If your drive needs a different diameter, groove count, or section, MR can quote a made-to-order pulley or locate a suitable one. Send the code POLEA 360 3C, or just the three characteristics you need, through WhatsApp or email. The team can also suggest equivalents and help you confirm compatibility with your equipment.
Dimensions
- Size
- 360mm
- Grooves
- 3
- Section
- C
Frequently asked questions
- What does POLEA 360 3C tell me about the pulley?
- It gives the three main specs: 360 mm diameter, 3 grooves, and section C. The section tells you which V-belt profile fits the grooves.
- Does MR make this pulley?
- Yes. MR manufactures pulleys in-house, so this item is part of its own production.
- Can I run a different belt section in these grooves?
- No. The pulley is cut for section C belts. Using another section can harm the belt or the pulley and throw off the drive. If you need a different section, ask about a pulley made for it.