Industrial pulley 500 mm, 2 grooves, section C
- Brand
- EMMAR
- Category
- Power transmission
- Subcategory
- Pulleys
- Section
- C
- Series
- Sección C
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
EMMAR POLEA 500 2C belongs to pulleys, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for POLEA 500 2C and any equivalents.
The POLEA 500 2C is a 500 mm diameter pulley with two grooves for section C V-belts, manufactured in-house under the EMMAR brand. Its two-groove design lets you run two belts side by side on the same shaft, which is useful for drives that need extra grip or redundancy. Common applications include fans, compressors, pumps and conveyors.
The part number POLEA 500 2C tells you the key dimensions: 500 mm diameter, 2 grooves, section C profile. This matches type C V-belts. Because EMMAR produces the pulley in its own plant, the diameter and groove profile are dimensionally controlled.
You will see this size and section in medium- to high-power drives such as industrial fans, screw compressors, centrifugal pumps, mills, mixers and belt conveyors. It also works as an output pulley on gearboxes or as a driven pulley where speed reduction and torque increase are needed. The two grooves are often chosen for equipment that cannot tolerate a shutdown if one belt breaks.
During installation, make sure the shaft and keyway are clean and free of burrs, and that the pulley slides on without hammering. Align the pulleys with a straightedge or laser before tensioning the belts; misalignment of even a few degrees will shorten belt and bearing life. Set tension according to the belt manufacturer's manual, or if unavailable, use the lowest tension that prevents slipping at full load.
If you need a different diameter or number of grooves, send the part number POLEA 500 2C or the full designation via WhatsApp. We can also evaluate an equivalent if you provide the outside diameter, shaft diameter, groove width and belt section. With that information, MR Industrial Accessories responds with the option that best fits your drive.
MR Industrial Accessories manufactures this pulley and other power transmission parts. If your equipment uses section C and you need a replacement pulley, contact us by WhatsApp with the part number for a quote. We also assist with mounting and belt selection so the drive is assembled correctly the first time.
Dimensions
- Size
- 500mm
- Grooves
- 2
- Section
- C
Frequently asked questions
- What does POLEA 500 2C mean?
- It identifies a 500 mm diameter pulley with 2 grooves and section C. This is how MR designates this in-house manufactured pulley. For shaft diameter or groove width, send the part number by WhatsApp and we will provide the data.
- What type of belt does it use?
- It is designed for section C V-belts. The two grooves allow mounting two belts in parallel on the same pulley. If your equipment uses a different section, ask us about an equivalent pulley with the profile you need.
- How do I request a pulley with a different size?
- Write to us by WhatsApp with the part number POLEA 500 2C and tell us the diameter, number of grooves or section you need. If you have shaft and keyway data, include it so we can quote the pulley that best adapts to your drive.