Industrial pulley 120 mm, 2 grooves, section C
- Brand
- EMMAR
- Category
- Power transmission
- Subcategory
- Pulleys
- Section
- C
- Series
- Sección C
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
EMMAR POLEA 120 2C belongs to pulleys, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for POLEA 120 2C and any equivalents.
The EMMAR 120 2C is a V-belt pulley with a 120 mm diameter and two grooves cut for section C belts. It transfers power between parallel shafts and, by pairing different diameters, allows you to set the driven speed you need. Because EMMAR produces it in its own shop, the dimensions and balance are held to a consistent standard.
Section C belts are wide-profile V-belts built for medium and high power. Two grooves let this pulley carry more load than a single-groove unit of the same diameter. The grooves are machined to the required tolerances so the belt seats evenly and does not wear early.
You will find this pulley on machine tools, compressors, pumps, fans and conveyors. It suits drives where the driven shaft must run slower or faster than the motor, and it fits low and medium power equipment such as mills, mixers and conveyor belts. Its compact size helps in tight spaces where a moderate ratio is enough.
When selecting a pulley, work from the pitch diameter, groove count and belt section. Check that the shaft diameter and keyway match. Align the pulleys during mounting to prevent uneven belt wear. Use taper bushings or keyed fixing as the application requires. Set belt tension correctly: too tight and the bearings take extra load; too loose and the belt slips.
Need a different groove count, diameter or section? EMMAR can make it. We can also quote an equivalent pulley from another brand. Send the part number, shaft dimensions and the belt section you use, and we will come back with a compatible option.
To request a quote for this pulley or ask about a special size, send the part number POLEA 120 2C by WhatsApp to MR Industrial Accessories. We will reply with manufacturing options. You can also inquire about other sections and diameters in our power transmission line.
Dimensions
- Size
- 120mm
- Grooves
- 2
- Section
- C
Frequently asked questions
- What does section C mean on this pulley?
- It means the pulley takes C-profile V-belts. Those belts have a set width and height and are used for medium and high power. Using the right section keeps the belt seated properly in the grooves.
- Can I get a pulley with more grooves?
- Yes, EMMAR manufactures pulleys with the groove count you specify. Send the diameter, section and number of grooves via WhatsApp, and we will quote it. We can also bore the shaft hole to your size.
- How do I check if this pulley fits my machine?
- Confirm the shaft diameter, the keyway and the belt section. Send us those details and we will tell you whether this pulley works or suggest an alternative. A photo of the original pulley also helps.