Industrial pulley 270 mm, 1 groove, section C

EMMAR POLEA 270 1C belongs to pulleys, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for POLEA 270 1C and any equivalents.

The EMMAR 270 1C is a single-groove power transmission pulley built in-house by MR. It measures 270 mm in diameter and takes a section C belt, so it suits drives that need one groove at a medium diameter. The groove is machined and the body is metal, which keeps the belt seated properly and the drive running steadily in continuous duty.

Reading the designation is straightforward. The 270 stands for the diameter in millimeters, the 1 for the number of grooves, and the C for the belt section the groove accepts. Because EMMAR produces this pulley, its geometry and finish follow the house standard rather than an outside specification. It mounts on a shaft and lines up with a second pulley in the same drive.

You will see this size on machine tools, compressors, fans, centrifugal pumps and conveyors. In each case a section C belt links the driving shaft to the driven one, and the ratio comes from the two pulley diameters. It fits equipment where there is not much room and a medium-diameter, single-groove pulley is what the layout calls for.

During installation, confirm the shaft diameter and key match the bore, then align the pulley with its counterpart before tensioning. Belt tension that is too loose causes slipping; too tight and the bearings carry extra load. When replacing an existing pulley, note the diameter, groove count and belt section, and we can identify the equivalent for you.

If the size you need is not a standard one, we can produce a special pulley or locate a comparable item. Send the part number POLEA 270 1C, or the details of the original pulley such as diameter, grooves, section and bore type, through WhatsApp or email. Our team replies promptly and helps you confirm the fit before you order.