Industrial pulley 600 mm, 4 grooves, section B

EMMAR POLEA 600 4B belongs to pulleys, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for POLEA 600 4B and any equivalents.

The EMMAR 600 4B is a V-belt pulley built for power transmission where speed and torque must stay consistent. It measures 600 mm in diameter and carries four grooves cut to section B. This combination suits medium- to high-demand machinery running profile B belts, and it is a common replacement item on production lines, mills, compressors and industrial ventilation equipment.

This pulley comes from EMMAR's in-house manufacturing. Diameter is 600 mm, groove count is four, and the groove profile is section B. Mounted on a shaft, it accepts section B V-belts. Spreading the drive across four grooves lets the belts share the load and keeps the system running if one belt gives out. Because section B fixes the groove width and depth, only belts of that section will seat correctly; mixing sections leads to poor fit and fast belt wear.

You will find this pulley on equipment with a fixed transmission ratio that also needs to damp vibration: mills, mixers, screw compressors, centrifugal fans, conveyor drives and machine tools. It also appears on agricultural implements and in water treatment plants. In every case it sits on a shaft and connects to a second pulley through belts, so the assembly depends on proper alignment and tension.

When selecting the 600 4B, confirm the outside diameter, the number of grooves and the belt section. Check that the shaft diameter and keyway match, and that the pulley runs centered. Misalignment between pulleys causes uneven belt wear and vibration. Set tension according to the equipment manual or with a tension gauge: too little tension lets belts slip, too much loads the shaft bearings.

Need a different diameter, groove count or section? We can manufacture it. Send the part number POLEA 600 4B or the original pulley data: diameter, grooves, section and bushing or bore type. For an equivalent pulley, provide shaft dimensions and center distance. Since we manufacture in-house, the part can be adapted to your requirements.

To request a quote for this pulley, message us on WhatsApp with the part number POLEA 600 4B. If you are unsure about the section or groove count, send a photo of the old pulley or the shaft dimensions. We reply with the technical details and the quote.