Single sprocket with hub, pitch 5/8", 50 teeth

MR Piñón simple 5/8" Z50 belongs to sprockets and gears, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for Piñón simple 5/8" Z50 and any equivalents.

This simplex sprocket with hub is identified by the code 5/8" Z50: a 5/8" pitch and 50 teeth. It is made from SAE 1045 steel. The hub is built into the sprocket, so it can be mounted directly on a shaft. MR supplies this sprocket for power transmission systems that use 5/8" pitch chain.

The integrated hub lets you secure the sprocket to the shaft with a key or a set screw, depending on how the machine is designed. Because the sprocket is made of SAE 1045 carbon steel, it handles the wear and loads that are normal in transmission service.

You will find this sprocket in chain drives that run on 5/8" pitch chain. Typical equipment includes conveyors, elevators, agricultural machines, production lines and synchronization mechanisms. It fits situations where a defined transmission ratio is needed and the sprocket can be attached directly to the shaft without extra bushings. The single-strand configuration is intended for moderate loads and medium speeds.

When selecting this sprocket, check three things: the chain pitch must be 5/8", the 50 teeth must give the transmission ratio you need, and the hub bore must match your shaft diameter. During installation, align the sprocket with the driven sprocket to prevent premature wear. Periodically lubricate the chain and verify its tension.

If your application calls for a different tooth count, pitch or hub size, MR can source a sprocket to match. Send the code from your drawing or a sample, and we will help you find an equivalent.

To request a quote for the 5/8" Z50 simplex sprocket or to ask about a variant, send the code to MR via WhatsApp or email. We will reply with the technical details for your requirement.