Single sprocket with hub, pitch 5/8", 16 teeth
- Brand
- MR
- Category
- Power transmission
- Subcategory
- Sprockets and gears
- Series
- paso 5/8"
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
MR Piñón simple 5/8" Z16 belongs to sprockets and gears, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for Piñón simple 5/8" Z16 and any equivalents.
This simplex sprocket with hub is identified by the part number MR-PINON-SIMPLE-5-8-Z16. It runs on 5/8" pitch chains and has 16 teeth (Z16). The body is machined from SAE 1045 carbon steel, a grade known for its strength and machinability. The sprocket is used in chain drives where a compact, sturdy component is required. Selection depends on the chain pitch, tooth count, and how the sprocket mounts to the shaft.
The 5/8" pitch must match the chain exactly; if it does not, the sprocket will not mesh. The 16 teeth set the transmission ratio and the speed at which the chain travels. A hub is included so the sprocket can be fitted to a shaft. SAE 1045 steel offers good resistance for moderate loads and contact wear. Typical applications include agricultural machinery, conveyors, elevators, mixers, and general transmission equipment.
When choosing a sprocket, confirm the chain pitch, number of teeth, shaft diameter, and fastening method. The hub allows mounting on various shaft sizes, but the bore, keyway, and set screws must be checked against your shaft. A lower tooth count increases the load on each tooth, so the ratio and speed requirements should be reviewed together.
To request a quote, send the part number MR-PINON-SIMPLE-5-8-Z16 by WhatsApp or email. If you only have the old sprocket, provide the pitch, tooth count, shaft diameter, and hub type. The team can suggest an equivalent from the same series or discuss a custom part. They can also help if the sprocket must work with an existing chain and maintain the original ratio.
For maintenance or replacement, verify the chain pitch and tooth count before ordering. The part number and key dimensions should be confirmed so the new sprocket fits the shaft and chain correctly. If you have questions about pitch, teeth, or mounting, contact MR Industrial Accessories for assistance.
Dimensions
- Pitch
- 5/8"
- Teeth (z)
- 16
- Material
- SAE 1045 steel
- Type
- Single sprocket with hub
Frequently asked questions
- What do the 5/8" pitch and 16 teeth mean?
- The 5/8" pitch is the distance between chain rollers. The chain must match this pitch for the sprocket to mesh. The 16 teeth determine the transmission ratio and chain speed. Both values are critical when selecting a replacement.
- What material is the sprocket made of?
- It is machined from SAE 1045 carbon steel, which provides good strength and machinability for moderate-load chain drives. If your application requires a different material or treatment, ask before requesting a quote.
- How do I request a different size or an equivalent sprocket?
- Send the part number MR-PINON-SIMPLE-5-8-Z16 or provide the pitch, number of teeth, shaft diameter, and hub type. The team can propose an alternative from the same series or discuss a custom part based on those details.