Single sprocket with hub, pitch 5/8", 10 teeth

MR Piñón simple 5/8" Z10 belongs to sprockets and gears, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for Piñón simple 5/8" Z10 and any equivalents.

This simplex sprocket with hub is identified by part number MR-PINON-SIMPLE-5-8-Z10. It runs on 5/8" pitch chains and has 10 teeth, making it a compact sprocket for drives where space is limited and a defined ratio is needed. The hub provides material for boring and keying to your shaft size. MR supplies this sprocket to maintenance and purchasing teams across the United States and Latin America.

The sprocket is made of SAE 1045 steel. Pitch is the distance between the centers of consecutive chain rollers, so 5/8" tells you which chain it accepts. With 10 teeth, it is a small sprocket, often used as the driving or output member in a compact drive. The hub gives it enough body to be machined with the bore and keyway your shaft requires, and it can be secured with a key, a set screw, or both.

Typical applications include agricultural machinery, conveyors, elevators, packaging equipment, and general production lines that already use 5/8" pitch chain. You will also find it in gearboxes and drive mechanisms where a specific ratio is required and space is tight. Because it is a small sprocket, it is usually paired with a larger wheel to complete the ratio. It is a practical replacement when the rest of the assembly is in good condition and only the sprocket needs to be renewed.

When selecting this sprocket, confirm the chain pitch, the number of teeth, and the shaft diameter. Check how the sprocket is fastened: key, set screw, or both. If the original part has a hub, note the hub length and outer diameter to avoid interference with nearby components. Alignment between the sprocket and the driven wheel matters to prevent the chain from jumping or wearing on one side. If you are unsure, send a photo or sketch with the shaft dimensions.

If you need a different tooth count, another pitch, or a different hub configuration, MR can source it. Provide the current part number, the number of teeth, the pitch, and the bore and keyway dimensions. With that information, the team confirms the matching options. Machining can be adjusted to suit your application.

To request a quote for the simplex sprocket 5/8" Z10, send part number MR-PINON-SIMPLE-5-8-Z10 by WhatsApp or email. If you have the parts breakdown or equipment data sheet, include it so the size can be verified before quoting. MR handles technical inquiries and special part orders.