Single sprocket with hub, pitch 3/8", 10 teeth
- Brand
- MR
- Category
- Power transmission
- Subcategory
- Sprockets and gears
- Series
- paso 3/8"
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
MR Piñón simple 3/8" Z10 belongs to sprockets and gears, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for Piñón simple 3/8" Z10 and any equivalents.
For drives that need to trade speed for torque, this simplex sprocket with hub offers a compact answer. It runs on 3/8" pitch chain and carries 10 teeth, so it fits reduction stages where the shaft turns slowly and the load is heavy. EMMAR builds it in SAE 1045 steel, a grade that stands up to wear in tough daily service.
The part number is MR-PINON-SIMPLE-3-8-Z10. Key figures: pitch 3/8", teeth 10 (z), material SAE 1045 steel, type simplex sprocket with hub. "Simplex" means a single row of teeth. The hub is the central body that lets you mount the sprocket on a shaft and lock it with a set screw, a key, or both.
You will find this sprocket in agricultural machinery, conveyors, elevators, mills, and material handling equipment. It also suits shop-built implements and low-speed mechanisms where space is tight. Because it has few teeth, it often works as the driving or driven sprocket in high-ratio reductions, as long as the chain pitch matches.
Before mounting, check that the shaft diameter and the fastening method line up with the hub. Then set alignment with the mating sprocket and adjust chain tension; both steps prevent early wear. When selecting, look at tooth count, pitch, material, and heat treatment if the application is severe. SAE 1045 steel gives a good balance of toughness and wear resistance.
Need an equivalent? Send the full part number, tooth count, pitch, and shaft diameter. With that information we can point you to another sprocket in the same series or review a special build. MR Industrial Accessories LLC also supplies split plummer block housings, ANSI chains, and sheaves, plus bearings, seals, bushings, and lubricants.
To request a quote for this simplex sprocket 3/8" Z10, send part number MR-PINON-SIMPLE-3-8-Z10 via WhatsApp or email. If you are unsure about chain compatibility or shaft mounting, ask us and we will help.
Dimensions
- Pitch
- 3/8"
- Teeth (z)
- 10
- Material
- SAE 1045 steel
- Type
- Single sprocket with hub
Frequently asked questions
- What does "simplex sprocket with hub" mean?
- It has one row of teeth and a central hub that mounts on the shaft, secured with a set screw or key. A sprocket without a hub mounts directly on a machined shaft.
- Which chain does this sprocket fit?
- It is made for 3/8" pitch chain. The chain must match that pitch for the teeth to mesh correctly. If your chain has a different pitch, contact us about a compatible option.
- Can I order a different size or an equivalent?
- Yes. Send the part number, number of teeth, pitch, and shaft diameter via WhatsApp. We can look for an equivalent in our line or evaluate a special manufacturing.