Single sprocket with hub, pitch 3/4", 60 teeth

MR Piñón simple 3/4" Z60 belongs to sprockets and gears, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for Piñón simple 3/4" Z60 and any equivalents.

This simplex sprocket with hub, part number MR-PINON-SIMPLE-3-4-Z60, is designed for 3/4" pitch chains. The hub provides a mounting point on the shaft, secured with set screws or a key. Made from SAE 1045 steel with 60 teeth, it suits drives that need to lower speed and raise torque in industrial equipment.

The sprocket has a single row of teeth, indicated by the simplex designation. Its 60 teeth (z) and 3/4" pitch are key specifications. The hub is the raised central section that fits over the shaft. As a power transmission component manufactured in-house by MR, its geometry and finish follow our standards.

Common uses for a sprocket like this include chain drives in agricultural machinery, conveyors, elevators, mills, and process equipment. With 60 teeth, it typically serves as the driven sprocket or in ratios that reduce speed relative to the drive sprocket. It also appears in linear motion, dosing, and synchronization mechanisms when the chain pitch is 3/4" and the available space accommodates the outside diameter.

For proper selection and installation, confirm the chain pitch matches 3/4" and the tooth count suits the desired ratio. Check the shaft diameter and the hub fastening method (key, set screws, or both). Ensure alignment between sprocket and chain, and set appropriate tension to avoid premature wear. At higher speeds, consider balancing and lubrication.

If you need an equivalent, send the existing part number, tooth count, pitch, and a photo or sketch showing the hub and bore dimensions. With that information, we can confirm an alternative in the same series or discuss a custom part. We can also advise on sprockets with other pitches or tooth counts from our transmission line.

To request a quote, send the part number MR-PINON-SIMPLE-3-4-Z60 by WhatsApp or email. If you are unsure about compatibility with your chain or shaft mounting, include a photo of the assembly and shaft dimensions. Our team will reply promptly with the best option for your equipment.