Single sprocket with hub, pitch 3/4", 10 teeth

MR Piñón simple 3/4" Z10 belongs to sprockets and gears, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for Piñón simple 3/4" Z10 and any equivalents.

The MR-PINON-SIMPLE-3-4-Z10 is a single-strand sprocket with a hub, built for 3/4" pitch roller chains. It carries 10 teeth and is machined from SAE 1045 carbon steel. This kind of sprocket suits drives where a compact, sturdy component with solid shaft contact is needed. When replacing a worn sprocket or setting up a new transmission, the usual approach is to match pitch, tooth count and bore diameter.

In the part number MR-PINON-SIMPLE-3-4-Z10, "simplex" means one row of teeth, "3-4" is the chain pitch in inches and "Z10" is the number of teeth. The hub is the thicker central section that fits over the shaft and allows the sprocket to be locked in place. Because pitch is fixed at 3/4", this sprocket will only mesh with a 3/4" pitch chain; a chain of any other pitch will not work. Tooth count, here 10, sets the speed ratio together with the mating sprocket or wheel.

Drives that use 3/4" pitch sprockets with a low tooth count tend to be compact and run at lower speeds: conveyors, elevators, agricultural equipment, material handling systems and similar machinery. They also appear where space is tight and speed reduction is achieved through a larger driven wheel. As a supplied item, it can be replaced with the same geometry or adapted to a different size to suit the machine.

Before mounting, confirm the chain pitch is 3/4" and the shaft diameter matches the bore. With only 10 teeth, check that the chain does not contact the hub and that there is enough clearance around the sprocket. Correct alignment between the sprocket and the mating wheel is important for chain life, since misalignment increases wear. Also consider lubrication and chain tension, particularly when the center distance is short.

If this exact sprocket does not fit your application, an equivalent can be reviewed. Send the part number MR-PINON-SIMPLE-3-4-Z10 or provide the data you have: pitch, number of teeth, shaft diameter, hub type and number of rows. With that information, in-house manufacturing of a special size within the line MR supplies can be evaluated. The more complete the details, the faster the equivalence can be confirmed.

To request a quote for this sprocket or to compare it with another size, contact us on WhatsApp or by email and include the part number. Every inquiry is answered with the item data and the quantity you need. You can also ask about 3/4" pitch chains and other power transmission components to complete the assembly.