Single sprocket with hub, pitch 1/2", 95 teeth
- Brand
- MR
- Category
- Power transmission
- Subcategory
- Sprockets and gears
- Series
- paso 1/2"
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
MR Piñón simple 1/2" Z95 belongs to sprockets and gears, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for Piñón simple 1/2" Z95 and any equivalents.
This simplex sprocket with hub runs on 1/2" pitch chain and carries 95 teeth. The hub is the raised center section that lets you mount it directly on a shaft, either with a keyway, with set screws, or both. It suits drives that need a large reduction or accurate, repeatable indexing, such as conveyors, machine tools and general power transmission equipment.
The designation Simplex sprocket 1/2" Z95 covers the following data: pitch 1/2", 95 teeth, material SAE 1045 steel, and simplex sprocket with hub. SAE 1045 is a medium-carbon steel used for parts that see moderate mechanical stress, and it can be heat treated when the application calls for it. The hub, unlike a flat plate sprocket, gives you a bore and a fastening surface for the shaft.
A 95-tooth sprocket on 1/2" pitch is common where a high reduction ratio is required. You will find it in chain conveyors, elevators, food processing machinery, packaging equipment and synchronized drive systems. It also appears in adjustment and positioning mechanisms that need controlled, repeatable feed. As a product MR supplies, it can be adapted to specific machining needs within the limits of the process.
When selecting this sprocket, check three things: chain pitch (1/2"), tooth count (95) and the shaft diameter that must match the hub bore. Confirm the fastening method as well, whether keyway, set screws or both. Align the sprocket with the driven sprocket to prevent premature wear and noise. For high-speed or high-load operation, consider whether additional heat treatment is needed; this can be managed on request.
If you need a different tooth count, another hub diameter or a different material, MR can supply it. The quickest way to request an equivalent is to send the part number MR-PINON-SIMPLE-1-2-Z95 or the full designation through WhatsApp, along with your shaft and chain data. The team will reply with a quote and can also advise on custom sprockets.
Dimensions
- Pitch
- 1/2"
- Teeth (z)
- 95
- Material
- SAE 1045 steel
- Type
- Single sprocket with hub
Frequently asked questions
- Is this sprocket suitable for a 1/2" pitch chain?
- Yes, it is designed for 1/2" pitch chains. Verify that your chain matches that pitch and that 95 teeth give the transmission ratio you need. If you have doubts, send us your machine data.
- What material is the sprocket made of?
- It is manufactured in SAE 1045 steel. This carbon steel is suitable for machining and can receive heat treatment if the application requires it. If you need another hardness or material, we can evaluate it.
- Can I order a sprocket with a different number of teeth?
- Yes, as a product we supply, we can provide sprockets with other tooth counts and hub dimensions. Send the part number or the dimensions you need via WhatsApp and we will quote you.