Single sprocket with hub, pitch 1/2", 41 teeth

MR Piñón simple 1/2" Z41 belongs to sprockets and gears, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for Piñón simple 1/2" Z41 and any equivalents.

For 1/2" pitch chain drives that require a 41-tooth ratio, this simplex sprocket with hub is a direct-mount solution. The hub lets you secure the sprocket straight onto the shaft, cutting down on extra hardware and simplifying installation. It is supplied by MR Industrial Accessories for conveyors, packaging lines, agricultural equipment and other power transmission applications.

The sprocket carries the part number MR-PINON-SIMPLE-1-2-Z41 and the full designation Simplex sprocket 1/2" Z41. It is made from SAE 1045 steel, a material known for its mechanical strength and hardenability, which suits moderate loads. The simplex design means a single row of teeth, and the hub is the raised center section that provides the bore for shaft mounting. Depending on the shaft, a keyway may be present to transfer torque.

Typical uses include chain drives in conveyors, elevators, agricultural machinery, packaging equipment and production-line motion systems. The 41-tooth count sets the transmission ratio, so this sprocket fits machines where that specific ratio and a 1/2" pitch chain are required. Because it mounts directly on the hub, it reduces the need for separate bushings or adapters.

When selecting this sprocket, confirm three things: the chain pitch must be 1/2", the tooth count must be 41, and the hub bore must match your shaft diameter. Also check that the keyway is compatible with your shaft key. Proper alignment between the sprocket and the chain is critical to avoid premature wear and ensure smooth operation.

If your application calls for a different tooth count, pitch or hub bore, we can source it. MR Industrial Accessories supplies sprockets and chain wheels, so we can locate the size that fits your requirement. To request an equivalent, send the current part number, number of teeth, pitch and shaft dimensions. With that information we will quote the part that best matches your machine.

To request a quote for this simplex sprocket 1/2" Z41 or to ask about a variant, contact us on WhatsApp and include the part number MR-PINON-SIMPLE-1-2-Z41. We will respond with technical information and a quote. You can also inquire about other sizes in the sprocket line we supply.