Double sprocket with hub, pitch 5/8", 60 teeth

MR Piñón doble 5/8" Z60 belongs to sprockets and gears, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for Piñón doble 5/8" Z60 and any equivalents.

When a single chain drive has to feed two lines or double the transmission capacity, a double sprocket with hub can replace two separate sprockets. The 5/8" Z60 model from MR is made of SAE 1045 steel and carries two rows of teeth on one body, so two chains can run from the same shaft position.

The part is defined by a 5/8" pitch and 60 teeth, arranged in a double row with a central hub. SAE 1045 steel gives the sprocket a balance of strength and machinability that suits transmission components. The hub provides the mounting surface on the shaft, and the two tooth rows can engage separate chains or work together depending on how the drive is set up. MR produces this sprocket in its own line and checks the main dimensions.

You will find this configuration in conveyor systems, packaging equipment, lifting mechanisms and drives where two chain runs start from one point. It also appears in synchronization arrangements, roller drives and machines with limited space for two individual sprockets. Using one part with two toothings keeps the chains aligned and cuts down the number of components in the assembly.

Selection starts with the chain pitch, tooth count, shaft diameter and the fastening method for the hub. Confirm that the chain matches the 5/8" pitch, and check alignment and lubrication to prevent early wear. If the drive ratio needs to change, look at other tooth counts in the same series. Material and surface treatment also affect how long the sprocket lasts under a given load and speed.

For an equivalent, send the existing part number, a photo or a sketch showing pitch, number of teeth, hub diameter and shaft diameter. That information lets us point you to a sprocket in the same series or review a custom build. Standard 5/8" pitch sizes are available, and we also develop parts from a sample or drawing so you can replace the component without stopping production.

To request a quote, send the part number MR-PINON-DOBLE-5-8-Z60 or the full designation by WhatsApp. Our technical team reviews each inquiry and replies with the options. If the sprocket sits in a critical assembly, we can advise on mounting and lubrication for reliable operation. MR supplies power transmission components with technical support and can help you define the right part.