Double sprocket with hub, pitch 5/8", 30 teeth

MR Piñón doble 5/8" Z30 belongs to sprockets and gears, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for Piñón doble 5/8" Z30 and any equivalents.

This double sprocket with hub is identified by the code MR-PINON-DOBLE-5-8-Z30. It runs on 5/8" pitch chain and carries 30 teeth, so it sets the drive ratio for your setup. The body is machined from SAE 1045 steel, a grade chosen for wear resistance and toughness in continuous duty. The hub gives you a mounting surface on the shaft, with room for set screws or a key. Two toothed rings on one body let you run parallel chains or reverse the direction of rotation without adding another shaft.

The designation tells you what you have: 5/8" is the distance from one chain roller center to the next, and Z30 means thirty teeth. Those thirty teeth determine how many chain links engage per revolution, which in turn sets the ratio between the driving and driven shafts. The hub is the central section that fits over the shaft; it can be secured with set screws or keyed. Because the sprocket is double, two chains can be driven from the same unit, or one chain can act as a return drive.

You will find this sprocket in chain conveyors, bucket elevators, and machinery for woodworking, food processing, and packaging. It also suits transmission equipment where you need to change speed or direction of rotation without extra shafts. The construction handles moderate loads at medium speeds, provided the chain pitch matches the sprocket.

When selecting, confirm that your chain is 5/8" pitch and that 30 teeth give the ratio you need. Check the hub bore against your shaft diameter; if it does not match, a bushing can be machined or adapted. During installation, align the sprockets so the chain runs true and wears evenly. Regular lubrication and correct chain tension will extend the life of the assembly.

If you need a different tooth count, another pitch, or a hub with different dimensions, we can source it. MR Industrial Accessories LLC also supplies bearing housings, chains, and pulleys. To request an equivalent, send the current code, pitch, number of teeth, and shaft diameter. We will quote the part based on that data.

To move forward, send the code MR-PINON-DOBLE-5-8-Z30 by WhatsApp. If you are unsure about compatibility with your chain, attach a photo or the pitch measurement. We will reply with the quote and alternatives, and can advise on mounting and lubrication.