Double sprocket with hub, pitch 5/8", 27 teeth
- Brand
- MR
- Category
- Power transmission
- Subcategory
- Sprockets and gears
- Series
- paso 5/8"
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
MR Piñón doble 5/8" Z27 belongs to sprockets and gears, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for Piñón doble 5/8" Z27 and any equivalents.
This 5/8" pitch, 27-tooth double sprocket is a chain wheel supplied by MR Industrial Accessories LLC. Two toothed rings share one hub, so a single shaft position can carry two chains running side by side. That layout suits drives where two movements must stay in step, or where the pull has to be shared without adding a second sprocket to the shaft.
The part is a double sprocket with hub, machined from SAE 1045 steel. Reading the designation is straightforward: chain pitch 5/8", tooth count 27 (z), and a double-row hub. SAE 1045 is a medium-carbon grade that transmission parts commonly use when wear resistance and toughness both matter.
Typical applications include chain drives on agricultural machinery, conveyors, bucket elevators, bottling equipment and production lines. Because both rows sit on the same hub, two chains can be mounted there, either to raise the torque transmitted or to drive two synchronized branches. Gear reducers and transmission boxes with tight mounting space are frequent users of this arrangement.
When selecting, confirm the chain pitch is 5/8" and that 27 teeth give the transmission ratio you need. The hub sets the shaft diameter and the fastening method, whether keyway, set screws or taper bushing. Check sprocket-to-chain alignment and correct tensioning to avoid premature wear. In dusty or humid conditions, plan suitable lubrication.
For a replacement, the most useful information is the complete part number of the sprocket being replaced, along with the tooth count and chain pitch. From there, the same series can be matched or an alternative tooth count evaluated. Other configurations in the sprocket line are also available on request.
To request a quote for this double sprocket 5/8" Z27, send the part number MR-PINON-DOBLE-5-8-Z27 via WhatsApp or email. The team replies promptly with the technical and commercial information needed to move ahead.
Dimensions
- Pitch
- 5/8"
- Teeth (z)
- 27
- Material
- SAE 1045 steel
- Type
- Double sprocket with hub
Frequently asked questions
- What does "double sprocket with hub" mean?
- Two toothed rings are mounted on one hub. Two chains can therefore work in parallel on the same shaft, either to share the pulling load or to keep two movements synchronized. The hub is the central section that fits the shaft.
- What material is the sprocket made of?
- It is machined from SAE 1045 steel, a medium-carbon steel widely used for transmission parts. It balances mechanical strength with wear resistance. Under severe conditions, additional heat treatment should be considered.
- How do I ask for an equivalent size or a similar sprocket?
- Send the part number of the sprocket you are replacing, the number of teeth and the chain pitch via WhatsApp or email. With that information an alternative within the line can be identified, and other sprocket configurations can be discussed.