Double sprocket with hub, pitch 3/8", 60 teeth

MR Piñón doble 3/8" Z60 belongs to sprockets and gears, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for Piñón doble 3/8" Z60 and any equivalents.

This double sprocket with hub is designed for 3/8" pitch chains and has 60 teeth. It consists of two toothed rings on a single hub, allowing two chains to run in parallel on the same shaft. The sprocket is machined in SAE 1045 steel and is identified by the code MR-PINON-DOBLE-3-8-Z60.

The double configuration means both toothed rings are integral to the hub and rotate together. The hub is the central section that mounts on the shaft and determines how the sprocket is secured. The 3/8" pitch must match the chain exactly; other pitches will not mesh.

Typical uses include chain drives that need to move two branches simultaneously or duplicate output from one point. It is found in conveyors, packaging machinery, lifting equipment, and synchronization mechanisms. It is also a good choice when axial space is tight, replacing two single sprockets mounted side by side.

When selecting, confirm the chain pitch is 3/8" and that 60 teeth suit the required ratio. Check the hub diameter and length against the shaft, and verify the fastening method (key, set screw, or both). Proper alignment between the two rings and the chains is important to avoid uneven wear.

If you need a different tooth count or a single sprocket, manufacturing can be evaluated. Provide the code MR-PINON-DOBLE-3-8-Z60 or the full designation along with your required dimensions. For equivalents, it helps to supply the pitch, number of teeth, hub diameter, and shaft fastening type.

MR Industrial Accessories supplies this sprocket along with bearings, housings, power transmission components, seals, bushings, mounting tools, and lubricants. To inquire about this size or a variant, send the code via WhatsApp or email for a prompt reply.