Double sprocket with hub, pitch 3/8", 24 teeth
- Brand
- MR
- Category
- Power transmission
- Subcategory
- Sprockets and gears
- Series
- paso 3/8"
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
MR Piñón doble 3/8" Z24 belongs to sprockets and gears, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for Piñón doble 3/8" Z24 and any equivalents.
This double sprocket with hub is built by EMMAR from SAE 1045 steel. It has two 24-tooth chain rings on a shared hub, designed for 3/8" pitch chain. The part is used to transmit motion between parallel shafts, and it serves as a replacement in equipment that runs this chain pitch and requires 24 teeth per wheel.
The designation Double sprocket 3/8" Z24 describes two chain wheels of 24 teeth each, connected by a common hub, for 3/8" pitch chain. SAE 1045 is a medium-carbon steel that can be machined and then heat treated according to what the drive requires.
Typical applications include light conveyors, packaging machines, material handling equipment and general transmission mechanisms where two chain lines must stay synchronized from one shaft. The hub mounts on the shaft and transfers torque to both chain rings as a single unit.
When selecting this sprocket, confirm the chain pitch is 3/8" and the tooth count is 24 to match the desired ratio. Also check the hub bore diameter and length, the fixing method (key, set screw or bushing) and the spacing between the two chain rings. Proper alignment with the driven wheel helps avoid uneven wear.
If you need a different tooth count or a single sprocket instead of a double, refer to part number MR-PINON-DOBLE-3-8-Z24 or provide the pitch, number of teeth and hub type. MR manufactures split plummer block housings, ANSI chains and sheaves, and distributes bearings, seals and power transmission components, so alternatives in the same line can be reviewed.
To request a quote for this sprocket or ask about an equivalent, send the part number by WhatsApp to MR. If you are unsure about the size, include a photo of the original part or the shaft and chain data. That helps confirm the correct variant before the quote is prepared.
Dimensions
- Pitch
- 3/8"
- Teeth (z)
- 24
- Material
- SAE 1045 steel
- Type
- Double sprocket with hub
Frequently asked questions
- What does double with hub mean?
- It means the sprocket has two 24-tooth chain rings joined by a central hub. The hub mounts on the shaft and drives both rings at once, so two chain lines can run from a single point.
- What chain pitch does it use?
- It is made for 3/8" pitch chain. The chain and the driven wheel must share that pitch for proper meshing. If your equipment uses a different pitch, ask about an alternative.
- Can I order a different number of teeth?
- Yes. MR manufactures sprockets and chain wheels, so a variant with a different tooth count or a single sprocket can be evaluated. Send the pitch, desired teeth and shaft dimensions by WhatsApp.