Double sprocket with hub, pitch 3/4", 38 teeth

MR Piñón doble 3/4" Z38 belongs to sprockets and gears, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for Piñón doble 3/4" Z38 and any equivalents.

When you need to drive two chains from one shaft, the double sprocket 3/4" Z38 from EMMAR is a practical solution. It is machined from SAE 1045 steel and carries two rows of teeth on a single central hub. With a 3/4" pitch and 38 teeth, it fits medium-to-heavy drive applications.

This sprocket goes by the commercial name Double sprocket 3/4" Z38 and belongs to the 3/4" pitch family. Its construction joins two tooth rings to one hub, so you can run two chains or set up two ratios without adding a second shaft. SAE 1045 steel gives the body strength and allows the teeth to be hardened when needed.

You will find this type of drive in agricultural equipment, conveyors, chain elevators, material handling systems and process lines. Gear reducers and transmission boxes also use it when an extra ratio is required. Before installation, confirm that the chain matches the 3/4" pitch and that the tooth count works with the rest of the drive.

Selection comes down to three basics: chain pitch (3/4"), number of teeth (38) and shaft diameter. The hub must fit the shaft correctly, and you need to plan for the fastening method—key, set screw or taper bushing. Check alignment between sprockets and chain tension; misalignment speeds up wear on both teeth and chain. For high-speed operation, verify balancing.

If you are looking for a replacement, the quickest route is to send the part number MR-PINON-DOBLE-3-4-Z38 or the original sprocket data: pitch, teeth, hub diameter and fastening type. With that information we can check whether a variant in the same series exists or if a custom part makes sense. We can also review switching to a single sprocket with hub if your application allows it.

To get a quote for this double sprocket 3/4" Z38, send the part number by WhatsApp or email. If you are unsure about chain compatibility or shaft mounting, include a photo or sketch with the main dimensions. Our team will reply promptly with the option that fits your equipment.