Double sprocket with hub, pitch 3/4", 24 teeth
- Brand
- MR
- Category
- Power transmission
- Subcategory
- Sprockets and gears
- Series
- paso 3/4"
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
MR Piñón doble 3/4" Z24 belongs to sprockets and gears, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for Piñón doble 3/4" Z24 and any equivalents.
The double sprocket 3/4" Z24 from MR is a chain wheel with an integrated hub, machined from SAE 1045 steel. It carries two toothed rings on a single body, so two 3/4" pitch chains can run from one shaft position or a single drive can be duplicated. The part number MR-PINON-DOBLE-3-4-Z24 identifies it for quoting.
The code tells you the essentials: 3/4" is the chain pitch, Z24 is the tooth count on each ring, and "double" means two rings share one hub. Because the hub is part of the sprocket, no separate hub is needed for shaft mounting. MR supplies this item with dimensional checks on the key measurements.
Typical installations include agricultural equipment, conveyors, chain elevators, and material handling systems. Two chain lines driven from the same shaft point are common in seeders, conveyor belts, and speed reducers. The design also suits layouts where axial space is limited but the output must be duplicated.
When selecting, confirm the 3/4" pitch and that 24 teeth produce the ratio you need. Measure the shaft diameter at the hub and identify the fastening method, whether keyway or set screw. SAE 1045 steel calls for regular chain lubrication and alignment checks between sprocket and driven wheel to keep wear even. For demanding duty, ask about heat treatment options.
For an equivalent, provide the full part number, pitch, tooth count, and a photo or sketch of the hub. We can search the 3/4" pitch sprocket range or review custom manufacturing. If the original sprocket uses a different tooth count, we can also propose a replacement.
To request a quote for this double sprocket 3/4" Z24, send part number MR-PINON-DOBLE-3-4-Z24 by WhatsApp or email. If you need help with mounting or want to verify dimensions before ordering, contact us and we will reply promptly.
Dimensions
- Pitch
- 3/4"
- Teeth (z)
- 24
- Material
- SAE 1045 steel
- Type
- Double sprocket with hub
Frequently asked questions
- What does "double with hub" mean?
- It means the sprocket has two toothed rings on one piece with an integrated hub. This allows two chains on the same shaft or a duplicated transmission without adding a separate hub. The pitch is 3/4" and each ring has 24 teeth.
- What material is it made of?
- It is machined from SAE 1045 steel, a carbon steel with good strength for power transmission. If your application needs greater surface hardness, ask about heat treatment alternatives or a sprocket from another series.
- How do I request a different size or an equivalent?
- Send the part number, chain pitch, number of teeth, and hub measurements by WhatsApp. We will review the 3/4" pitch sprocket line and offer an option or evaluate custom manufacturing.