Double sprocket with hub, pitch 1/2", 35 teeth

MR Piñón doble 1/2" Z35 belongs to sprockets and gears, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for Piñón doble 1/2" Z35 and any equivalents.

This double sprocket with hub is supplied by MR Industrial Accessories. It has a 1/2" pitch and 35 teeth, and it is machined from SAE 1045 steel. The part number is MR-PINON-DOBLE-1-2-Z35. It is used in chain drives that need accurate tooth engagement and a secure fit on the shaft. To request a quote, send the part number by WhatsApp or email.

The designation "double sprocket" means the teeth and the hub are made as one piece. That one-piece construction makes mounting simpler and helps keep the sprocket concentric with the shaft. The 1/2" pitch tells you which chain it runs with, and the 35 teeth set the drive ratio. The hub is the part that attaches to the shaft using standard fasteners.

You will find this sprocket in chain transmissions on industrial machines and equipment: conveyors, elevators, mixers, belts and drive systems in general. It also appears in agricultural implements and in material handling equipment that needs a moderate speed change. Because it is made of SAE 1045 steel, it handles the tensile stresses and wear that come with continuous meshing. It is often replaced when the teeth become rounded or the hub deforms under overload.

When selecting it, confirm the chain pitch is 1/2" and the tooth count matches the ratio you need. Check the shaft diameter and how the hub fastens: keyway, set screw or taper bushing as applicable. Also check alignment between sprockets and chain tension to avoid premature wear. If the original sprocket has no visible brand, measure the teeth and the hub before ordering a replacement.

To quote an equivalent, send the part number MR-PINON-DOBLE-1-2-Z35 or a photo of the sprocket with the main dimensions: pitch, number of teeth, hub diameter and fastening type. With that information, we can point you to another tooth count in the same series or look at a custom manufacturing option. We can also quote variants in SAE 1045 steel with different treatments if your application calls for it.

To request a quote for this double sprocket 1/2" Z35, contact MR Industrial Accessories by WhatsApp with the part number or the designation. We will confirm alternatives in the series. If you have questions about mounting or selection, our technical team can help you define the right option for your transmission.