Double sprocket with hub, pitch 1/2", 22 teeth
- Brand
- MR
- Category
- Power transmission
- Subcategory
- Sprockets and gears
- Series
- paso 1/2"
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
MR Piñón doble 1/2" Z22 belongs to sprockets and gears, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for Piñón doble 1/2" Z22 and any equivalents.
For drives that need two chains running side by side, this double sprocket with hub delivers the answer. It carries a 1/2" pitch and 22 teeth, and it is machined from SAE 1045 steel. The hub lets you secure it to a shaft with a key or a set screw, while the two rows keep both chains in step.
The part is listed under the code MR-PINON-DOBLE-1-2-Z22. Its key data are: pitch 1/2", tooth count 22 (z), material SAE 1045 steel, and type double sprocket with hub. The double row is what sets it apart from a single-strand sprocket: it can drive two chains at once, which is useful when you need to synchronize two movements or spread the load across two strands.
You will find this sprocket in chain drive systems on agricultural equipment, conveyors, lifting gear and production lines. It also shows up on road implements and material handling machines that run roller chains. With a 1/2" pitch and 22 teeth, it fits specific transmission ratios where two motions must stay in sync or where the pulling capacity needs to be increased.
When selecting this sprocket, check three things: the chain pitch (1/2"), the number of teeth (22) and the shaft diameter at the mounting point. The hub bore must match the shaft, and the fastening method (keyway or set screw) has to line up with the shaft features. Also verify that the two rows are aligned and that chain tension is set correctly. SAE 1045 steel gives good wear resistance and toughness, though depending on the demand a surface treatment may be needed.
If your application calls for a different tooth count, another pitch or a single-strand version, MR can manufacture it. Custom sprockets and gears are part of what we produce. To ask for an equivalent, send the code MR-PINON-DOBLE-1-2-Z22 or the specifications you need (pitch, teeth, hub type) through WhatsApp.
For a similar part, reach out with the code MR-PINON-DOBLE-1-2-Z22 on WhatsApp, and we will help you find the right transmission solution.
Dimensions
- Pitch
- 1/2"
- Teeth (z)
- 22
- Material
- SAE 1045 steel
- Type
- Double sprocket with hub
Frequently asked questions
- What are the pitch and tooth count of this double sprocket?
- This sprocket has a 1/2" pitch and 22 teeth (z). It is made of SAE 1045 steel and is a double sprocket with hub. Those values are fixed for this code; if you need a different setup, we can manufacture it.
- How do I request a quote or an equivalent?
- Send the code MR-PINON-DOBLE-1-2-Z22 via WhatsApp along with your contact details. If you are after an equivalent, tell us the pitch, number of teeth and hub type. We will reply with a quote.
- What should I check before mounting this sprocket?
- Confirm that the shaft diameter matches the hub bore, that the keyway or set screw aligns with the shaft, and that the two chain rows are aligned with proper tension.