V-belt Movendis PP-XPZ825-EPDM-AS
- Brand
- MOVENDIS
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- XPZ
- Series
- PowerPlus EPDM Cogged Raw Edge Narrow
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
MOVENDIS PP-XPZ825-EPDM-AS belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for PP-XPZ825-EPDM-AS and any equivalents.
This Movendis PowerPlus EPDM Cogged Raw Edge Narrow belt is a cogged narrow V-belt in the XPZ profile with an 825 mm length. It is built for compact, high-speed industrial drives where a standard wrapped belt would run too hot or slip under load.
Cogged narrow V-belts are common on pumps, fans, compressors, machine tools and other continuous-duty equipment. The raw edge and molded cogs help the belt flex around smaller pulleys and run cooler than a wrapped belt of the same profile. The XPZ profile and 825 mm length are the two numbers to match when replacing an existing belt.
To confirm fit, read the marking on the back of the old belt. It should show XPZ and a length; if it reads 825, this belt matches. Also check the pulley grooves for wear, oil or debris, and confirm the belt sits correctly in the groove without riding on the bottom. If the drive uses more than one belt, replace the full set at the same time so the load stays even.
If the marking is worn or unreadable, measure the outside length and the top width of the old belt and send those figures with your quote request. Our team can help confirm the correct belt or suggest an equivalent.
Dimensions
- Section
- XPZ
- Length
- 825mm
Frequently asked questions
- How do I confirm this belt fits my drive?
- Check the marking on the old belt for XPZ and 825 mm. If those match, this belt is the correct profile and length. Also inspect the pulleys for wear or damage before installing.
- Can I replace just one belt on a multi-belt drive?
- No. On a drive with two or more belts, replace the full set at the same time. Mixing a new belt with worn belts can cause uneven tension and premature failure.
- What information do I need to request a quote?
- Send the part number PP-XPZ825-EPDM-AS, or the XPZ profile and 825 mm length from the old belt marking. If the marking is unreadable, include the outside length and top width.