V-belt Movendis PP-XPZ722-EPDM-AS
- Brand
- MOVENDIS
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- XPZ
- Series
- PowerPlus EPDM Cogged Raw Edge Narrow
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
MOVENDIS PP-XPZ722-EPDM-AS belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for PP-XPZ722-EPDM-AS and any equivalents.
The Movendis PowerPlus EPDM Cogged Raw Edge Narrow belt in XPZ profile is a cogged narrow V-belt built for compact, high-speed industrial drives. This page covers where this type of belt is used and how to confirm it matches your application before you request a quote.
Cogged narrow V-belts are common on drives where space is tight and speeds are higher than a classical V-belt drive would allow, such as pumps, fans, compressors and small machine tools. The raw edge and cogged construction suit small pulley diameters and back-idler layouts. This belt is XPZ profile with a length of 722 mm, so it fits drives specified for that profile and center distance.
To confirm fit, read the marking on the back of the old belt and compare the profile and length. XPZ is the profile; 722 mm is the datum length. Check the pulley grooves for wear, oil or debris, and confirm the drive uses the same profile on all grooved pulleys. If the marking is worn or missing, measure the outside length and send that with photos of the belt and the drive.
When replacing a belt on a multi-belt drive, fit a full set of the same profile and length so the load is shared evenly. Check pulley alignment and belt tension after installation, then re-check tension after the first run-in period. Belts that show cracking, glazing or missing cogs should be replaced rather than re-tensioned.
Dimensions
- Section
- XPZ
- Length
- 722mm
Frequently asked questions
- How do I confirm this belt fits my drive?
- Compare the profile and length on the back of your old belt with XPZ and 722 mm. Also check that every grooved pulley on the drive takes the same profile.
- What should I send with my quote request?
- Send the part number PP-XPZ722-EPDM-AS, the old belt marking, and photos of the belt and the drive. If the marking is unreadable, include the measured outside length.
- Can I replace just one belt on a multi-belt drive?
- For even load sharing, replace the full set with belts of the same profile and length. Mixing new and used belts can cause the new belt to carry more load.