V-belt Movendis PP-XPZ3170-EPDM-AS
- Brand
- MOVENDIS
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- XPZ
- Series
- PowerPlus EPDM Cogged Raw Edge Narrow
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
MOVENDIS PP-XPZ3170-EPDM-AS belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for PP-XPZ3170-EPDM-AS and any equivalents.
The Movendis PP-XPZ3170-EPDM-AS is a cogged narrow V-belt in the XPZ profile with a length of 3170 mm. The XPZ profile and the 3170 mm length are the two numbers to match against your drive before you order.
The XPZ profile sets the belt's cross-section, so it fits pulleys cut for that profile. The 3170 mm length is the datum length for the belt, so confirm it against the old belt's marking or the drive's required length. Both numbers appear in the part number, which makes the PP-XPZ3170-EPDM-AS easy to identify on a shelf or in a maintenance record.
This is a cogged narrow V-belt, also called a wedge belt. The raw-edge cogged construction is part of the PowerPlus EPDM Cogged Raw Edge Narrow series from Movendis. When you replace a belt, check the pulleys for wear and alignment and inspect the other belts on the same drive. If several belts run together, replace them as a set so the load stays even.
To request a quote, send the part number PP-XPZ3170-EPDM-AS by WhatsApp or email. If you are unsure of the profile or length, send a photo of the marking on the back of the old belt and the pulley dimensions. We carry Movendis belts and can confirm the right belt or suggest an equivalent.
Dimensions
- Section
- XPZ
- Length
- 3170mm
Frequently asked questions
- What do the XPZ profile and 3170 mm length mean for my drive?
- XPZ is the belt's cross-section profile, so it must match the pulley groove profile. The 3170 mm length is the belt's datum length and must match the length your drive requires. Check both against the old belt or the drive documentation before ordering.
- How do I confirm the part number on my old belt?
- Look for the marking on the back of the belt. The part number PP-XPZ3170-EPDM-AS identifies the profile and length. If the marking is worn, measure the outside length and the cross-section, or send a photo for help.
- Can I replace just one belt on a multi-belt drive?
- On a drive with several belts, replacing them as a set keeps the load shared evenly. A single new belt alongside worn belts can carry more than its share. Inspect the pulleys and alignment at the same time.