V-belt Movendis PP-XPZ2240-EPDM-AS
- Brand
- MOVENDIS
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- XPZ
- Series
- PowerPlus EPDM Cogged Raw Edge Narrow
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
MOVENDIS PP-XPZ2240-EPDM-AS belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for PP-XPZ2240-EPDM-AS and any equivalents.
The Movendis PP-XPZ2240-EPDM-AS is a cogged narrow V-belt in the XPZ profile with a length of 2240 mm. It is the correct choice when the belt being replaced carries this same part number or the same profile and length. Confirm both values from the old belt before you request a quote.
The most reliable match is the marking on the back of the belt you are removing. Read the part number, the profile and the length, and compare them with PP-XPZ2240-EPDM-AS. The profile must be XPZ and the length must be 2240 mm; a belt of another profile will not sit correctly in the pulley grooves even if it looks similar.
If the old marking is worn or unreadable, measure the outside length and check the cross-section against the pulley groove. A cogged narrow V-belt is identified by its profile and its length, so both values need to agree. When the drive uses more than one belt, replace the full set at the same time so the load stays evenly distributed.
Send the part number, the profile and the 2240 mm length by WhatsApp or email to request a quote. If you are unsure whether this is the right belt, send a photo of the old belt marking and the pulley grooves, and the team can confirm the match or suggest an equivalent.
Dimensions
- Section
- XPZ
- Length
- 2240mm
Frequently asked questions
- How do I confirm this is the belt I need?
- Check the marking on the back of the old belt. It should show the XPZ profile and a length of 2240 mm. If it matches PP-XPZ2240-EPDM-AS, this is the belt to quote.
- What if the old belt marking is unreadable?
- Measure the belt length and compare the cross-section with the pulley groove. Send those details, or a photo of the old belt and the pulleys, and the team can help identify the correct belt.
- Should I replace more than one belt at a time?
- On a multi-belt drive, replace all belts in the set together. Mixing a new belt with worn belts can cause uneven loading and faster wear.