V-belt Movendis PP-XPZ1612-EPDM-AS
- Brand
- MOVENDIS
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- XPZ
- Series
- PowerPlus EPDM Cogged Raw Edge Narrow
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
MOVENDIS PP-XPZ1612-EPDM-AS belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for PP-XPZ1612-EPDM-AS and any equivalents.
The Movendis PP-XPZ1612-EPDM-AS is a cogged narrow V-belt in the XPZ profile with a 1612 mm length. It is used on industrial drives where a compact, high-grip belt is required. Confirm fit by matching the profile and length to your drive.
Cogged narrow V-belts are common on pumps, fans, compressors and other driven equipment where space is limited and the pulley grooves are cut for a narrow section. The XPZ profile and 1612 mm length are the two dimensions to check against your existing belt or drive specification.
To confirm fit, read the marking on the back of the old belt. It should show the profile and length. If the old belt is worn or unmarked, measure the outside length and compare it to 1612 mm, and check that the pulley grooves accept an XPZ section. A belt that is too long or too short will not tension correctly.
If you are replacing a belt on a multi-belt drive, replace all belts in the set at the same time so they share the load evenly. Send the part number PP-XPZ1612-EPDM-AS by WhatsApp or email to request a quote. If you need help confirming the profile or length, include a photo of the belt marking and the pulley grooves.
Dimensions
- Section
- XPZ
- Length
- 1612mm
Frequently asked questions
- How do I confirm this belt fits my drive?
- Check the profile and length against your existing belt or drive specification. The XPZ profile and 1612 mm length are the key dimensions. If the old belt is unmarked, measure its outside length and compare it to 1612 mm.
- Can I replace just one belt on a multi-belt drive?
- It is good practice to replace all belts in a set at the same time. Belts that have run together wear evenly, and mixing a new belt with old ones can cause uneven loading.
- What information should I send to request a quote?
- Send the part number PP-XPZ1612-EPDM-AS and the quantity you need. If you want us to confirm the profile or length, include a photo of the marking on the old belt and the pulley grooves.