V-belt Movendis PP-XPZ1400-EPDM-AS
- Brand
- MOVENDIS
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- XPZ
- Series
- PowerPlus EPDM Cogged Raw Edge Narrow
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
MOVENDIS PP-XPZ1400-EPDM-AS belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for PP-XPZ1400-EPDM-AS and any equivalents.
The Movendis PP-XPZ1400-EPDM-AS is a cogged narrow V-belt in the XPZ profile with a 1400 mm length. Before fitting it, inspect the drive and sheaves so the new belt seats and wears correctly. We carry this belt and quote by part number.
Start with the sheaves. Check groove wear, cracks, and any buildup in the grooves, since a worn or dirty sheave can shorten belt life and cause slip or noise. Confirm the sheave grooves match the XPZ profile and that the belt sits at the correct depth. Misalignment between sheaves is a common cause of edge wear, so check alignment with a straightedge before installation.
The PP-XPZ1400-EPDM-AS is a cogged narrow V-belt, often called a wedge belt. The cogged raw edge design helps with flexibility and heat dissipation on smaller pulleys. Its profile is XPZ and its length is 1400 mm. If the drive uses multiple belts, replace them as a set and re-tension after the first run-in period.
To request a quote, send the part number PP-XPZ1400-EPDM-AS by WhatsApp or email. If you are matching an old belt, include the marking on the back of the belt and the drive details so we can confirm the right belt or suggest an equivalent.
Dimensions
- Section
- XPZ
- Length
- 1400mm
Frequently asked questions
- What should I check on the drive before installing this belt?
- Inspect sheave grooves for wear, cracks, and buildup, and verify alignment between sheaves. Confirm the grooves match the XPZ profile and that the belt sits at the correct depth.
- Can I replace just one belt on a multi-belt drive?
- For drives using multiple belts, replace them as a set and re-tension after the first run-in period. Mixing a new belt with worn belts can cause uneven load and premature failure.
- What do you need to quote the PP-XPZ1400-EPDM-AS?
- Send the part number by WhatsApp or email. If you are matching an old belt, include the marking on the back of the belt and the drive details so we can confirm the right belt or suggest an equivalent.