V-belt Movendis PP-XPZ1320-EPDM-AS
- Brand
- MOVENDIS
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- XPZ
- Series
- PowerPlus EPDM Cogged Raw Edge Narrow
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
MOVENDIS PP-XPZ1320-EPDM-AS belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for PP-XPZ1320-EPDM-AS and any equivalents.
The Movendis PP-XPZ1320-EPDM-AS is a cogged narrow V-belt in the XPZ profile with a length of 1320 mm. It belongs to the PowerPlus EPDM Cogged Raw Edge Narrow series. To match it to the belt being replaced, confirm the profile and length on the old belt.
Start by reading the marking on the back of the belt you are replacing. Look for the profile, XPZ, and the length, 1320 mm. If the old belt is worn or the marking is unreadable, measure the outside length and compare it to 1320 mm. The XPZ profile and 1320 mm length are the key identifiers for this Movendis belt.
Because this is a cogged narrow V-belt, it is designed for drives that use XPZ profile pulleys. Check that the pulley grooves are clean and free of wear. When replacing a belt on a multi-belt drive, it is good practice to replace all belts in the set at the same time to maintain even tension and load sharing.
If you are unsure whether this is the correct replacement, send a photo of the old belt’s marking and your equipment details. Our team can help confirm the right belt or suggest an equivalent. We carry the Movendis PP-XPZ1320-EPDM-AS and can quote it by part number via WhatsApp or email.
Dimensions
- Section
- XPZ
- Length
- 1320mm
Frequently asked questions
- How do I confirm this belt matches the one I am replacing?
- Check the profile and length on the old belt. This belt has an XPZ profile and a length of 1320 mm. If the marking is unreadable, measure the outside length and compare it to 1320 mm.
- Can I replace just one belt on a multi-belt drive?
- It is recommended to replace all belts in the set at the same time. This helps maintain even tension and load sharing across the drive.
- What information should I send for a quote?
- Send the part number PP-XPZ1320-EPDM-AS, or a photo of the old belt’s marking, along with any equipment details. Our team will confirm the belt or suggest an equivalent.