V-belt Movendis PP-XPZ1222-EPDM-AS
- Brand
- MOVENDIS
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- XPZ
- Series
- PowerPlus EPDM Cogged Raw Edge Narrow
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
MOVENDIS PP-XPZ1222-EPDM-AS belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for PP-XPZ1222-EPDM-AS and any equivalents.
The Movendis PP-XPZ1222-EPDM-AS is a cogged narrow V-belt in the XPZ profile with a 1222 mm length. For a maintenance or purchasing professional, those two values are the whole selection story: XPZ sets the groove width the belt must sit in, and 1222 mm sets the outside length the drive needs.
Cogged narrow V-belts are also called wedge belts. The XPZ profile is a narrow cross-section, so it transmits load through a deeper, narrower wedge than a classic V-belt of similar top width. The raw edge and cogged construction are part of the PowerPlus EPDM Cogged Raw Edge Narrow series from Movendis, the brand we carry.
When you match a replacement, read the marking on the back of the old belt. Confirm XPZ and 1222 mm before you order. If the marking is worn or the belt has been running on a worn sheave, send the part number and a photo of the belt and the drive to our team. We reply by WhatsApp or email and can confirm the right belt for the application.
For drives with more than one belt, replace the full set at the same time so the belts share the load evenly. Check sheave grooves for wear and alignment before installation, and keep the drive free of oil and debris.
Dimensions
- Section
- XPZ
- Length
- 1222mm
Frequently asked questions
- What do the XPZ profile and 1222 mm length mean for my drive?
- XPZ is the narrow V-belt profile that must match the sheave groove. 1222 mm is the belt length. Both values need to match the drive before you replace the belt.
- How do I confirm this is the right belt for my equipment?
- Read the marking on the back of the old belt. If it shows XPZ and 1222 mm, this belt matches that size. If the marking is unclear, send us the part number and a photo of the drive.
- Can I replace just one belt on a multi-belt drive?
- Replace the full set at the same time. Belts on the same drive should be the same size and condition so they carry the load evenly.