V-belt Movendis PP-XPZ1112-EPDM-AS
- Brand
- MOVENDIS
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- XPZ
- Series
- PowerPlus EPDM Cogged Raw Edge Narrow
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
MOVENDIS PP-XPZ1112-EPDM-AS belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for PP-XPZ1112-EPDM-AS and any equivalents.
This Movendis PowerPlus EPDM Cogged Raw Edge Narrow belt is a cogged narrow V-belt in the XPZ profile with a length of 1112 mm. Cogged narrow V-belts are used on industrial drives where a compact, high-capacity belt is needed, such as pumps, fans, compressors and other machinery with small-diameter pulleys. To confirm fit, match the profile and the length shown on the old belt to XPZ and 1112 mm.
The raw edge and cogged construction are typical of drives that run over small pulleys, where a standard wrapped belt may not flex as easily. The XPZ profile and 1112 mm length are the two dimensions that determine whether this belt will sit correctly in the pulley grooves and maintain the correct center distance.
Before ordering, read the marking on the back of the old belt. It should show the profile and length, and you can compare those to XPZ and 1112 mm. If the marking is worn or missing, measure the outside length and check the pulley groove width to confirm the profile. Send the part number PP-XPZ1112-EPDM-AS, or the profile and length, by WhatsApp or email and the team will confirm the right belt or suggest an equivalent.
When replacing a belt on a multi-belt drive, inspect all belts in the set and the pulley grooves for wear. A new belt fitted alongside worn belts can carry more than its share of the load, so replacing the full set is common practice on industrial drives.
Dimensions
- Section
- XPZ
- Length
- 1112mm
Frequently asked questions
- How do I confirm that this belt fits my drive?
- Check the marking on the old belt for the profile and length. This belt is XPZ profile and 1112 mm long. If the marking is unreadable, measure the outside length and check the pulley groove dimensions to confirm the XPZ profile before ordering.
- What information should I send for a quote?
- Send the part number PP-XPZ1112-EPDM-AS, or the profile XPZ and length 1112 mm, by WhatsApp or email. If you have the old belt, include a photo of the back marking and the pulley grooves.
- Should I replace all belts on the drive at the same time?
- On multi-belt drives, it is good practice to replace the full set together. Mixing new and worn belts can cause uneven loading and premature wear. Inspect the pulley grooves for wear at the same time.