V-belt Movendis PP-XPZ1000-EPDM-AS
- Brand
- MOVENDIS
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- XPZ
- Series
- PowerPlus EPDM Cogged Raw Edge Narrow
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
MOVENDIS PP-XPZ1000-EPDM-AS belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for PP-XPZ1000-EPDM-AS and any equivalents.
This Movendis PowerPlus EPDM Cogged Raw Edge Narrow belt is a cogged narrow V-belt with an XPZ profile and a 1000 mm length. It is used on industrial drives where a compact, high-capacity narrow belt is required. Confirm fit by matching the XPZ profile and the 1000 mm length to your drive.
Cogged narrow V-belts are common on pumps, fans, compressors and other driven equipment where space is limited and the drive runs at higher speeds. The raw edge and cogged construction are typical of this belt type, and the EPDM compound is part of the PowerPlus EPDM Cogged Raw Edge Narrow series from Movendis.
To confirm fit, read the marking on the back of the old belt. The profile should be XPZ and the length should be 1000 mm. If the old belt is worn or the marking is unreadable, measure the outside length and compare it to the 1000 mm length listed for this belt. Also check the pulley grooves for wear and alignment before installing a replacement.
When you request a quote, send the part number PP-XPZ1000-EPDM-AS or the profile and length. If you are replacing belts on a multi-belt drive, include the quantity so the set can be matched. Our team can help confirm the right belt or suggest an equivalent based on the information you provide.
Dimensions
- Section
- XPZ
- Length
- 1000mm
Frequently asked questions
- What does the XPZ profile mean for fit?
- XPZ is the profile of this narrow V-belt. It must match the pulley groove profile on your drive. The length is 1000 mm. Confirm both the profile and the length before ordering.
- How do I read the marking on my old belt?
- Look for the profile and length on the back of the belt. This belt is marked with the XPZ profile and a 1000 mm length. If the marking is worn, measure the outside length and compare it to 1000 mm.
- What should I send to request a quote?
- Send the part number PP-XPZ1000-EPDM-AS, or the XPZ profile and 1000 mm length. If you are replacing multiple belts on the same drive, include the quantity so we can help you match the set.