V-belt Movendis PP-XPC2120-EPDM-AS
- Brand
- MOVENDIS
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- XPC
- Series
- PowerPlus EPDM Cogged Raw Edge Narrow
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
MOVENDIS PP-XPC2120-EPDM-AS belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for PP-XPC2120-EPDM-AS and any equivalents.
The Movendis PP-XPC2120-EPDM-AS is a cogged narrow V-belt in the XPC profile with a length of 2120 mm. It belongs to the PowerPlus EPDM Cogged Raw Edge Narrow series. To match it to the belt being replaced, compare the profile and length marked on the old belt with these values.
The most reliable way to identify the correct replacement is to read the marking on the back of the belt you are removing. Look for the profile, XPC, and the length, 2120 mm. If those match the PP-XPC2120-EPDM-AS, the belt is the same size. The cogged raw edge construction is part of the series name and is suited to drives where a narrow V-belt is specified.
If the old belt is worn or the marking is unreadable, measure the outside length and confirm the cross-section before ordering. A belt that is close in length but different in profile will not seat correctly in the pulley grooves. When you request a quote, send the part number PP-XPC2120-EPDM-AS, or send the profile and length from the old belt so we can confirm the match.
Replacing belts on a drive that uses more than one belt should be done as a set. Mixing a new belt with worn belts can cause uneven tension and rapid wear. The PP-XPC2120-EPDM-AS is a single belt; if your drive takes multiple belts, include the quantity needed when you request a quote.
Dimensions
- Section
- XPC
- Length
- 2120mm
Frequently asked questions
- How do I confirm the PP-XPC2120-EPDM-AS matches my old belt?
- Check the marking on the back of the old belt. It should show the XPC profile and a 2120 mm length. If both match, this belt is the same size.
- What should I send to request a quote?
- Send the part number PP-XPC2120-EPDM-AS, or send the profile and length from your old belt. If your drive uses multiple belts, include the quantity.
- Can I replace just one belt on a multi-belt drive?
- It is best to replace all belts on the drive at the same time. Mixing new and worn belts can lead to uneven tension and faster wear.