V-belt Movendis PP-XPB5000-EPDM-AS
- Brand
- MOVENDIS
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- XPB
- Series
- PowerPlus EPDM Cogged Raw Edge Narrow
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
MOVENDIS PP-XPB5000-EPDM-AS belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for PP-XPB5000-EPDM-AS and any equivalents.
The Movendis PP-XPB5000-EPDM-AS is a cogged narrow V-belt in the XPB profile with a length of 5000 mm. To match the belt being replaced, compare the profile and length marked on the old belt with these two values. If they match, this is the correct size.
The marking on the back of the old belt is the fastest way to confirm the profile and length. The PP-XPB5000-EPDM-AS is an XPB profile belt with a 5000 mm length. If the old belt shows XPB and 5000 mm, this belt is the same size. Do not rely on a part number alone; the profile and length are the key dimensions.
This belt is part of the Movendis PowerPlus EPDM Cogged Raw Edge Narrow series. The cogged raw edge construction is designed for drives that need a narrow profile with a cogged design. The XPB profile and 5000 mm length are the only dimensions needed to match it to the drive.
When you request a quote, send the part number PP-XPB5000-EPDM-AS or the profile and length from the old belt. We carry this belt and can confirm it against your drive. If the marking is worn, measure the length and check the profile before ordering.
Dimensions
- Section
- XPB
- Length
- 5000mm
Frequently asked questions
- How do I match the Movendis PP-XPB5000-EPDM-AS to the belt I am replacing?
- Check the profile and length marked on the old belt. This belt is XPB profile with a 5000 mm length. If the old belt shows XPB and 5000 mm, it is the same size.
- What if the marking on my old belt is unreadable?
- Measure the outside length and confirm the profile from the pulley groove. The replacement must be XPB profile and 5000 mm. Send us the part number or the measured profile and length for a quote.
- Can I use this belt if my old belt has a different part number but the same profile and length?
- Yes. The profile and length are what matter for fit. If your old belt is XPB and 5000 mm, this belt is the same size. Send us the old part number or the marking for confirmation.