Skip to main content
All products
Movendis logo · MOVENDIS PP-XPB3000-EPDM-AS
V-belt Movendis PP-XPB3000-EPDM-AS

MOVENDISBrand We Carry

V-belt Movendis PP-XPB3000-EPDM-AS

Manufacturer part numberPP-XPB3000-EPDM-ASAlso known as: PPXPB3000EPDMAS · PP XPB3000 EPDM AS
Subcategory
V-belts
Section
XPB
Series
PowerPlus EPDM Cogged Raw Edge Narrow
Get a quote for PP-XPB3000-EPDM-AS on WhatsApp

We reply promptly.

Tell us the quantity you need and request a quote by WhatsApp or email.

Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.

Ask on WhatsAppAsk by email

Description

MOVENDIS PP-XPB3000-EPDM-AS belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for PP-XPB3000-EPDM-AS and any equivalents.

The Movendis PP-XPB3000-EPDM-AS is a cogged narrow V-belt in the PowerPlus EPDM Cogged Raw Edge Narrow series. It has an XPB profile and a length of 3000 mm. Before you fit it, inspect the drive so the new belt is not damaged by worn components.

Start with the sheaves. Check grooves for wear, rust, or embedded debris, and confirm the grooves match the XPB profile. Misaligned sheaves or a bent shaft will shorten belt life and cause noise. Verify that the sheave diameters and the center distance allow the 3000 mm belt to be tensioned correctly.

Turn the drive by hand and look for rough bearings, a worn bushing, or a failed tensioner. Any of these will affect the new belt. If the drive uses multiple belts, replace the full set so the load is shared evenly.

The marking on the back of the belt reads PP-XPB3000-EPDM-AS. To request a quote, send that part number and the quantity you need by WhatsApp or email. We carry the Movendis line and can help confirm the right belt for your drive.

Dimensions

Section
XPB
Length
3000mm

Frequently asked questions

What is the profile and length of this belt?
The Movendis PP-XPB3000-EPDM-AS has an XPB profile and a length of 3000 mm.
What should I check on the drive before fitting this belt?
Inspect sheave grooves for wear and debris, check alignment and shaft condition, and turn the drive to check bearings and the tensioner. Correct any issues before fitting the new belt.
How do I request a quote?
Send the part number PP-XPB3000-EPDM-AS and your quantity by WhatsApp or email. Our team replies promptly and can help confirm the right belt.
Get a quote for PP-XPB3000-EPDM-AS on WhatsApp
Quote on WhatsApp