V-belt Movendis PP-XPB1700-EPDM-AS
- Brand
- MOVENDIS
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- XPB
- Series
- PowerPlus EPDM Cogged Raw Edge Narrow
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
MOVENDIS PP-XPB1700-EPDM-AS belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for PP-XPB1700-EPDM-AS and any equivalents.
The Movendis PP-XPB1700-EPDM-AS is a cogged narrow V-belt in the XPB profile with a 1700 mm length. It belongs to the PowerPlus EPDM Cogged Raw Edge Narrow series. When you are replacing an existing belt, matching the profile and length is the first step.
Start by reading the marking on the back of the belt you are removing. Look for the profile and the length: this belt is marked XPB and 1700 mm. If the old belt still shows those two values, the PP-XPB1700-EPDM-AS is the direct size to request. If the marking is worn or missing, measure the belt and note the cross-section and length before contacting us.
The XPB profile is a narrow wedge cross-section, and the cogged raw edge construction is typical of this Movendis series. The 1700 mm length is the datum to confirm. Do not substitute a belt with a different profile or length without checking the drive, because the pulley grooves and center distance must suit the belt.
Send the part number, the old belt marking, or both by WhatsApp or email. Our team replies promptly and can confirm the right belt or suggest an equivalent if the exact number is not what you need. For drives with multiple belts, replace the full set at the same time and keep the same profile and length across the set.
Dimensions
- Section
- XPB
- Length
- 1700mm
Frequently asked questions
- How do I match this belt to the one I am replacing?
- Read the marking on the back of the old belt. The replacement must show the same profile, XPB, and the same length, 1700 mm. If the marking is unreadable, measure the old belt and send those values.
- What should I send to get a quote for the PP-XPB1700-EPDM-AS?
- Send the part number PP-XPB1700-EPDM-AS, or the profile and length from the old belt, by WhatsApp or email. Photos of the belt marking also help us confirm the size.
- Can I replace just one belt on a multi-belt drive?
- For drives that use more than one belt, replace the full set at the same time. Use belts of the same profile and length so the load is shared evenly across the set.