V-belt Movendis PP-XPB1280-EPDM-AS
- Brand
- MOVENDIS
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- XPB
- Series
- PowerPlus EPDM Cogged Raw Edge Narrow
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
MOVENDIS PP-XPB1280-EPDM-AS belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for PP-XPB1280-EPDM-AS and any equivalents.
The Movendis PP-XPB1280-EPDM-AS is a cogged narrow V-belt in the XPB profile with a length of 1280 mm. It belongs to the PowerPlus EPDM Cogged Raw Edge Narrow series. Before fitting this belt, inspect the drive and sheaves so the new belt runs true from the start.
Check sheave grooves for wear, burrs, rust, or embedded debris. Worn grooves let a new cogged narrow V-belt sit too deep, which leads to slipping and heat. Confirm the sheaves are aligned and the shafts turn freely. Look for oil, grease, or coolant that can attack an EPDM belt. Correct any misalignment or runout before installation.
Measure the old belt and compare the marking on its back to the required XPB profile and 1280 mm length. The PP-XPB1280-EPDM-AS is a cogged narrow V-belt from the Movendis PowerPlus EPDM Cogged Raw Edge Narrow series. If the drive uses multiple belts, replace them as a set so the load stays even across all grooves. Set tension to the drive maker's specification and recheck after the first run-in period.
To request a quote, send the part number PP-XPB1280-EPDM-AS by WhatsApp or email. Include the belt marking, the drive or equipment details, and the quantity you need. Our team replies promptly and can help confirm the right belt or suggest an equivalent.
Dimensions
- Section
- XPB
- Length
- 1280mm
Frequently asked questions
- What should I check on the drive before installing this belt?
- Inspect sheave grooves for wear, burrs, rust, and debris. Verify alignment and that shafts turn freely. Remove any oil, grease, or coolant that could affect the belt.
- How do I identify the correct replacement belt?
- Read the marking on the back of the old belt. For this Movendis belt, the profile is XPB and the length is 1280 mm. Confirm the part number PP-XPB1280-EPDM-AS when ordering.
- What information should I send with my quote request?
- Send the part number, the belt marking, the drive or equipment details, and the quantity. You can reach us by WhatsApp or email.