V-belt Movendis PP-XPA975-EPDM-AS
- Brand
- MOVENDIS
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- XPA
- Series
- PowerPlus EPDM Cogged Raw Edge Narrow
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
MOVENDIS PP-XPA975-EPDM-AS belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for PP-XPA975-EPDM-AS and any equivalents.
The Movendis PowerPlus EPDM Cogged Raw Edge Narrow belt is a cogged narrow V-belt in the XPA profile with a length of 975 mm. It is built for compact, high-speed industrial drives where a standard wrapped belt would run too hot or slip under load.
Cogged narrow V-belts are common on pumps, fans, compressors, and machine tool spindles. The raw edge profile grips the pulley groove directly, and the cogs improve flexibility around small sheaves. This belt is identified by the marking on its back: Movendis PowerPlus EPDM Cogged Raw Edge Narrow, profile XPA, length 975 mm.
To confirm fit, read the old belt's back and compare the profile and length. The XPA profile and 975 mm length must match the drive's pulley groove and center distance. If the marking is worn, measure the outside length and check the pulley groove width against an XPA profile.
Send the part number PP-XPA975-EPDM-AS by WhatsApp or email to request a quote. If you are replacing a belt on a drive with multiple belts, include the quantity and the full marking from each belt so we can help you match the set.
Dimensions
- Section
- XPA
- Length
- 975mm
Frequently asked questions
- How do I confirm this belt fits my drive?
- Check the marking on the back of the old belt for the XPA profile and 975 mm length. The pulley groove must be suitable for an XPA profile, and the drive center distance must match the 975 mm belt length.
- Can I use this belt on a drive that originally used a different profile?
- No. The profile and length must match the pulley groove and drive layout. If the old belt is marked with a different profile or length, send us that marking and we can help you identify the correct belt.
- What information do you need to quote this belt?
- Send the part number PP-XPA975-EPDM-AS and the quantity. If you are replacing a set, include the marking from each belt so we can help you match the set.