V-belt Movendis PP-XPA4500-EPDM-AS
- Brand
- MOVENDIS
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- XPA
- Series
- PowerPlus EPDM Cogged Raw Edge Narrow
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
MOVENDIS PP-XPA4500-EPDM-AS belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for PP-XPA4500-EPDM-AS and any equivalents.
The Movendis PP-XPA4500-EPDM-AS is a cogged narrow V-belt in the XPA profile with a 4500 mm length. It belongs to the PowerPlus EPDM Cogged Raw Edge Narrow series. Use it when you need to match a worn belt on a drive that takes this profile and length.
The simplest way to match this belt is to read the marking on the back of the belt you are replacing. Confirm the profile is XPA and the length is 4500 mm. If the old belt shows the same profile and length, the PP-XPA4500-EPDM-AS is the direct match.
If the marking is worn or unreadable, measure the belt and check the drive. The XPA profile and 4500 mm length must both agree with the replacement. A belt of the same profile but a different length will not fit correctly.
When you send your request, include the part number PP-XPA4500-EPDM-AS and, if you have it, a photo of the old belt marking. For drives that use more than one belt, order the full set so all belts on the drive are replaced together.
Dimensions
- Section
- XPA
- Length
- 4500mm
Frequently asked questions
- How do I confirm this belt matches the one I am replacing?
- Check the marking on the old belt. It should show the XPA profile and a 4500 mm length. If both match, the PP-XPA4500-EPDM-AS is the correct replacement.
- What should I send to request a quote?
- Send the part number PP-XPA4500-EPDM-AS, the quantity you need, and a photo of the old belt marking if it is readable. If you are replacing a set, include the number of belts on the drive.
- Can I replace just one belt on a multi-belt drive?
- For drives that use more than one belt, replace all belts on the drive at the same time. Mixing a new belt with worn belts can cause uneven tension and premature wear.