V-belt Movendis PP-XPA3382-EPDM-AS
- Brand
- MOVENDIS
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- XPA
- Series
- PowerPlus EPDM Cogged Raw Edge Narrow
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
MOVENDIS PP-XPA3382-EPDM-AS belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for PP-XPA3382-EPDM-AS and any equivalents.
The Movendis PP-XPA3382-EPDM-AS is a cogged narrow V-belt in the XPA profile with a length of 3382 mm. The XPA profile and the 3382 mm length are the two numbers that determine whether this belt fits your drive. Use both when you check the belt against the pulley grooves and the measured length of the old belt.
This belt belongs to the Movendis PowerPlus EPDM Cogged Raw Edge Narrow series. Cogged narrow V-belts, also called wedge belts, run in drives where a compact cross-section carries the load. The raw edge and the cogged underside are part of the series description; the profile is XPA and the length is 3382 mm.
To confirm the belt on the machine, read the marking on the back of the old belt and compare the profile and length. If the marking is worn off, measure the outside length and check the pulley groove width. The part number PP-XPA3382-EPDM-AS identifies this exact belt when you request a quote.
When you replace a belt, inspect the pulleys for wear and the drive for alignment. If a drive uses more than one belt, replace the set together so the belts share the load evenly. Send the part number, the profile and the length shown on the old belt, and the quantity you need.
Dimensions
- Section
- XPA
- Length
- 3382mm
Frequently asked questions
- What do the profile and length tell me about this belt?
- The profile is XPA, which is the cross-section that must match the pulley grooves. The length is 3382 mm, which must match the length of the belt the drive was built for. Both values are listed for this belt.
- How do I confirm this is the right belt for my drive?
- Read the marking on the back of the old belt and compare the profile and length. If the marking is not readable, measure the old belt and check the pulley groove dimensions. The part number PP-XPA3382-EPDM-AS identifies this belt.
- What should I send to request a quote?
- Send the part number PP-XPA3382-EPDM-AS, the profile XPA, the length 3382 mm, and the quantity you need. If you have the old belt, include a photo of the back marking so we can confirm the match.